List of products by brand trem

Active filters

€5.98
€8.54 -30%
Last items in stock
The FM radio antenna is an electronic component used to receive radio signals in the frequency modulated (FM) band. These antennas are designed to capture the radio waves transmitted by FM radio stations and convert them into an electrical signal that can be processed by the radio to produce the transmitted audio. In summary, an FM radio antenna is an essential component for receiving radio signals in the FM band and must be carefully chosen and installed to ensure the best possible reception quality. Cable length: 130cm.
€4.88
€6.98 -30%
Last items in stock

This 2-inch diameter suction cup compass features a compact and functional design. Its white color gives it an elegant and discreet look that fits well in any environment.

Made of durable plastic, the compass is designed to last and withstand adverse environmental conditions. The suction cup, located at the base, ensures a secure attachment to smooth surfaces, making the compass ideal for use on boats, car dashboards, or other flat surfaces.

One of the distinctive features of this compass is the ultra-sensitive compensation system, which ensures precise and reliable direction reading even in the presence of external magnetic fields that could interfere.

€21.35
€30.50 -30%
Last items in stock

Discover the excellence of our Lamb's Wool Glove, designed specifically for boat washing. Made from the highest quality lambswool, this glove provides superior cleaning while protecting your boat's delicate surfaces. 

Usage Tips:

Wet: Soak the glove in warm water with a mild detergent. Squeeze lightly and wipe over the surfaces to be cleaned in circular motions.

Dry: Use the glove dry to remove dust and light dirt. Ideal for quick cleaning without the use of water.

€14.89
€21.28 -30%
In arrivo, puoi procedere al pre ordine
The coated dragline cover is made of soft closed-cell polyurethane foam coated with "cordura" polyester fabric. It can be applied to draglines without the need to disassemble them and conforms perfectly to them without unsightly play. Suitable for draglines of any diameter and is also perfect for covering the tensioner. Length 100 cm, outer diameter 40 mm, available in white color.
€18.86
€26.94 -30%
In arrivo, puoi procedere al pre ordine

White drag cover coated and manufactured in soft closed-cell polyurethane foam coated in polyester fabric "cordura". It applies to the draglines without the need to dismantle them and conforms perfectly to them without unsightly gaps. Suitable for draglines of any diameter. Perfect also for covering the tensioner.

Length 150 cm

Outer diameter: 40 mm

€14.89
€21.28 -30%
Last items in stock
The covered draglie cover is made of soft closed-cell polyurethane foam coated with "cordura" polyester fabric. It can be applied to draglie without the need to disassemble them and conforms perfectly to them without unsightly gaps. Suitable for draglie of any diameter and perfect for covering the tensioner. Length 100 cm, outer diameter 40 mm, available in blue.
€18.86
€26.94 -30%
In arrivo, puoi procedere al pre ordine
Our coated dragline cover is made of soft closed-cell polyurethane foam coated in "cordura" polyester fabric. It can be applied to draglines without the need to dismantle them and conforms perfectly to them. Suitable for draglines of any diameter and is also perfect for covering the tensioner. Length 150 cm, outer diameter 40 mm. Available in blue.
€21.34
€30.49 -30%
In Stock

The 100A double connection bars are designed to simplify and optimise wiring, allowing negative and positive terminals to be combined on a single bar. 

The bar is silver-plated copper, ensuring excellent conductivity and superior corrosion resistance, while stainless steel screws and pin add strength and durability. The fully insulated ABS base ensures maximum protection against short circuits.

With a length of 76.5 mm and a width of 46.48 mm, these bars are compact and easy to install. They support a voltage of 300/48V and are equipped with 5 pairs of ways with 4 mm screws, making them ideal for electrical, marine and industrial applications.

€24.95
€35.65 -30%
Last items in stock

This ANL fuse is designed to offer reliable protection in vehicle electrical systems and low-voltage systems.

Voltage level: 9-32V.

Rated current: 50 amperes.

Interrupting capacity: 6000A for safe and efficient protection.

Hole spacing: 61.72 mm.

Dimensions: 80.9 x 22.6 mm, compact and easy to install.

Ideal for automotive, marine and low-voltage applications. Reliability and safety to protect your circuits.

€3.28
€4.68 -30%
In Stock
The 8033B micro-led indicator light is designed for quick and secure installation thanks to its special LED holder, which allows for snap-in fixing. With a wide voltage compatibility range from 12 to 24 V, the indicator light is suitable for a variety of applications. Its slim design allows for installation on panels with a thickness ranging from 1 to 5 mm, ensuring discreet integration into the surrounding environment. The indicator light is available in yellow color. The micro-led has a diameter of 3 mm and requires a mounting hole of only 4 mm, minimizing the impact on the panel surface. The overall size of the indicator light is 5 mm in diameter and can be installed on panels with a maximum depth of 15 mm.
€3.28
€4.68 -30%
Last items in stock
The micro LED indicator light 8171B is designed for quick and secure installation thanks to its special LED holder, which allows for snap-in fixation. With a wide voltage compatibility ranging from 12 to 24 V, the indicator light is suitable for a variety of applications. Its slim design enables installation on panels with a thickness between 1 and 5 mm, ensuring discreet integration into the surrounding environment. The indicator light is available in a vivid red color. The micro LED has a diameter of 3 mm and requires a mounting hole of only 4 mm, minimizing the impact on the panel surface. The overall size of the indicator light is 5 mm in diameter and can be installed on panels with a maximum depth of 15 mm.
€3.28
€4.68 -30%
In Stock
The micro-led indicator light 8172B is designed for quick and secure installation thanks to its special LED holder, which allows for snap-in fixing. With a wide voltage compatibility range from 12 to 24 V, the indicator light is suitable for a variety of applications. Its slim design allows for installation on panels with a thickness ranging from 1 to 5 mm, ensuring discreet integration into the surrounding environment. The indicator light is available in green color. The micro-led has a diameter of 3 mm and requires a recess hole of only 4 mm, minimizing the impact on the panel surface. The overall size of the indicator light is 5 mm in diameter and can be installed on panels with a maximum depth of 15 mm.
€7.30
€10.43 -30%
Last items in stock

Compact and stylish, this dual USB socket is ideal for in-car charging.

Input voltage: 12-24V DC (suitable for cars and trucks).

Colour: Black, modern and durable design.

Dimensions: 63 x 39 x 36 mm, easy to install and space-saving.

Functionality: 2 USB ports for simultaneous charging of devices.

Perfect for smartphones, tablets, navigators and other electronic devices. Maximum reliability and practicality for your travels.