List of products by brand Mercury

The MerCruiser anode plate for Alpha One Gen 2 sterndrive is an essential component for protecting the sterndrive against galvanic corrosion. Specifically designed for the Alpha One Gen 2 sterndrive in the MerCruiser range, it guarantees perfect compatibility and precise installation. Designed to fit perfectly to the profile of the Alpha One Gen 2 sterndrive, it ensures maximum adhesion and continuous protection across the entire surface area. The use of a specific spare part for this model guarantees durability, efficiency and safety over time.

The Mercruiser anode for sterndrives, original part number 821631Q1, is an essential replacement part for protecting Mercury Marine MerCruiser sterndrive units from galvanic corrosion.

Designed to offer maximum compatibility and effective protection, this anode performs a ‘sacrificial’ function: it wears away gradually in place of the metal parts of the sterndrive, preserving structural components such as the casing, flange and transmission system from the corrosive action of water, particularly in a marine environment.

Dimensions:

Length: 95 mm

Width: 80 mm

Height: 39 mm

Longitudinal hole centre distance: 66 mm

Transverse hole centre distance: 33 mm

The Mercury Mariner water pump upper seal is a key component of the water pump assembly in Mercury Marine and Mariner outboard engines with standard mountings. It is compatible with the following models:

30, 40, 50, 55, 60 HP 2-stroke

25, 30, 35, 40, 45, 50, 60 HP 4-stroke (standard foot)

The original foot anode for Mercury Marine 2.5 HP and 3.5 HP outboard motors is an essential component for protecting the motor foot against galvanic corrosion. Designed specifically for these low-power models, it guarantees perfect compatibility and precise mounting without the need for adjustments.

The Mercury 25hp 8508910 impeller is a key component of the cooling system in Mercury Marine 25 horsepower outboard motors. Identified by the original part number 8508910, this impeller is designed to ensure a constant flow of cooling water from the motor foot to the engine block, preventing overheating and mechanical damage.

Mercury Mercruiser Bravo and Alpha bell foot nut 859116

The original Mercury Marine transmission oil pipe fitting is an essential component for ensuring the correct connection and perfect sealing of the transmission lubrication circuit. Manufactured to OEM standards, it ensures maximum reliability, corrosion resistance and perfect compatibility with original systems. This spare part is suitable for Alpha One Gen II transmissions (from 1998 onwards) and Bravo One, Bravo Two and Bravo Three models, ensuring correct and safe oil flow between the tank and the transom.

Mercury Marine is one of the world's leading manufacturers of marine engines and propulsion systems for recreational and professional boats. Thanks to constant technological research, Mercury is recognised for the fuel efficiency, high power and durability of its products, which are designed for both recreational and professional use.

The original MerCruiser IAC filter is a key component for the proper functioning of the idle control system in 3.0 MPI and 4.3 MPI engines. Installed on the Idle Air Control (IAC) valve, it filters the incoming air, protecting the circuit from impurities, dust and debris that could compromise idle stability. Ideal for routine maintenance on MerCruiser 3.0 MPI and 4.3 MPI engines, it is the recommended choice for preserving the efficiency and durability of the fuel system.

The MerCruiser belt for V6 and V8 MPI engines is an essential component for the proper functioning of engine services, as it simultaneously drives the alternator and seawater pump, ensuring both battery charging and proper engine cooling.

With a length of 2704 mm, this belt is designed to offer perfect adherence to the pulleys and constant power transmission, ensuring efficiency and reliability even in harsh marine conditions. Made from materials that are resistant to wear, heat and humidity, it maintains its elasticity and performance over time.

Oil filter 35-866340K01 is a component designed for MerCruiser engines, black in color and branded Mercury. This filter is specifically designed to provide effective engine oil filtration, helping to keep the engine in perfect condition, reducing wear and improving overall performance.

In addition, this oil filter replaces 35-866340Q03, which is distinguished by its white color.

The Mercury engine oil filter, code 877761Q01, is an original spare part designed to ensure optimal lubrication in Mercury 4-stroke outboard engines with electronic injection from 80 to 115 HP (1.7 L).

This filter traps impurities, combustion residues and small particles present in the oil, ensuring that the oil circulating inside the engine is always clean. Effective filtration helps maintain proper oil pressure, reduces wear on internal components and contributes to engine durability and reliability.

Original oil filter for Mercury Verado outboard 200-400 HP 6-cylinder inline engines.

The MerCruiser engine transmission cardan bearing is a key component of the sterndrive system, designed to support and stabilise the drive shaft between the engine and the transom.

Compatible with Alpha One Gen I, Alpha One Gen II, Bravo I, Bravo II and Bravo III transmissions, this bearing ensures precise alignment of the cardan shaft, reducing vibration and wear during operation.

The MerCruiser transom bell bearing, part number 879194A02, is a key support component for the Alpha One sterndrive system. Mounted in the transom bell, this bearing supports and guides the drive shaft between the inside of the engine and the stern drive, ensuring proper alignment and smooth rotation.

Designed to original MerCruiser standards, the bearing offers high resistance to stress and the marine environment, helping to reduce vibration, premature wear and stress on other mechanical parts. It is an essential spare part for maintenance or repair of the Alpha One sterndrive transmission, ensuring reliable performance and long life of the propulsion system.

The chrome ring for MerCruiser tachometers and speedometers is a finishing accessory designed for instruments with a diameter of 85 mm. Made with a high-quality polished chrome finish, this ring enhances the appearance of the dashboard and protects the outer edge of the instruments, giving the console a more elegant and professional design.

Original quicksilver replacement filter for Mercury outboard engines with part number 35-879885Q.

30/40 HP EFI 4-STROKE

40/50/60 EFI 4-stroke 4 CYLINDER (996cc)

Verado (4 stroke) 75, 80, 90, 100, 115 hp EFI and 150, 200, 250, 275, 300, 350, 400 hp (4 stroke)

Ensure the longevity and maximum performance of your valuable marine engine with the original Quicksilver Mercruiser oil filter, part number 883702Q. Designed specifically for the demanding marine environment, this is not just any automotive filter; it is the original equipment manufacturer (OEM) replacement designed by Mercury Marine engineers to provide unmatched protection for your investment. When it comes to maintaining the heart of your boat, there is no substitute for the precision and quality of an original Quicksilver filter.

The E2.2 Alpha One Gen II Mercury aluminium anode kit is designed to provide effective protection against galvanic corrosion of second-generation Mercury Alpha One sterndrives. Made from high-performance aluminium alloy, the kit ensures superior durability compared to traditional zinc anodes and is particularly suitable for saltwater, freshwater and brackish water environments.

The product may differ from the photo.

Aluminium anode kit for MerCruiser Bravo II: set of sacrificial anodes designed to protect the stern drive and submerged metal parts from galvanic corrosion. Made of high-performance aluminium alloy, they guarantee excellent protection in salt and brackish water, long life and perfect compatibility with Bravo II models. Easy to install, they help preserve the efficiency and value of the system over time.