List of products by brand Osculati

PAOMAR anchor saver made of fiberglass-reinforced polymer. Always recovers anchors and ropes. Release load adjustable from 20 to 200 kg, unalterable in marine environments. 

The 5 kg Trefoil stainless steel anchor is made of stainless steel using a microcasting process, a technique that guarantees high manufacturing precision, structural strength, and great reliability over time. Each anchor is then machined and finished by hand, ensuring superior quality and attention to detail that enhances both its aesthetics and performance.

The polished, shiny finish not only gives it an elegant appearance, but also offers excellent resistance to corrosion in a marine environment. Its dimensions are designed to ensure excellent holding power and optimal balance during anchoring maneuvers:

A: 240 mm

B: 470 mm

C: 320 mm

The 7.5 kg Trefoil stainless steel anchor is made of stainless steel using a microcasting process, a technique that guarantees high manufacturing precision, structural strength, and great reliability over time. Each anchor is then machined and finished by hand, ensuring superior quality and attention to detail that enhances both its aesthetics and performance.

The polished, shiny finish not only gives it an elegant appearance, but also offers excellent resistance to corrosion in a marine environment. Its dimensions are designed to ensure excellent holding power and optimal balance during anchoring maneuvers:

A: 270 mm

B: 540 mm

C: 360 mm

The 11 kg Trefoil stainless steel anchor is made of stainless steel using a microcasting process, a technique that guarantees high manufacturing precision, structural strength, and great reliability over time. Each anchor is then machined and finished by hand, ensuring superior quality and attention to detail that enhances both its aesthetics and performance.

The polished, shiny finish not only gives it an elegant appearance, but also offers excellent resistance to corrosion in a marine environment. Its dimensions are designed to ensure excellent holding power and optimal balance during anchoring maneuvers:

A: 310 mm

B: 590 mm

C: 385 mm

The 20 kg Trefoil stainless steel anchor is made of stainless steel using a microcasting process, a technique that guarantees high manufacturing precision, structural strength, and great reliability over time. Each anchor is then machined and finished by hand, ensuring superior quality and attention to detail that enhances both its aesthetics and performance.

The polished, shiny finish not only gives it an elegant appearance, but also offers excellent resistance to corrosion in a marine environment. Its dimensions are designed to ensure excellent holding power and optimal balance during anchoring maneuvers:

A: 355 mm

B: 660 mm

C: 475 mm

The 30 kg Trefoil stainless steel anchor is made of stainless steel using a microcasting process, a technique that guarantees high manufacturing precision, structural strength, and great reliability over time. Each anchor is then machined and finished by hand, ensuring superior quality and attention to detail that enhance both its aesthetics and performance.

The polished, shiny finish not only gives it an elegant appearance, but also offers excellent resistance to corrosion in a marine environment. Its dimensions are designed to ensure excellent holding power and optimal balance during anchoring maneuvers:

A: 410 mm

B: 815 mm

C: 560 mm

Discover the 7.5 kg Trefoil anchor, designed by Osculati to offer secure holding in all seabeds and optimal manoeuvrability when sailing, with progressive burial.

Perfect for boats up to approximately 7 m – balanced for light and medium-sized boats.

Compact but effective dimensions:

Height: 23 cm

Width: 35 cm

Length: 54 cm

Weight 7.5 kg.

The 10 kg Trefoil anchor is a reliable and high-performance nautical solution, ideal for securely mooring small and medium-sized boats.

Weight: 10 kg, perfect for hulls up to approximately 8 m.

Approximate dimensions: height approximately 320 mm, length approximately 583 mm and mouth opening approximately 380 mm. 

Trefoil-type boat anchor with progressive burial, made of cast steel and hot-dip galvanised for excellent corrosion resistance and reliability in different seabed conditions. Ideal for medium-sized boats.

Weight: 15 kg

Length (B): 655 mm

Height (A): 335 mm

Mouth opening (C): 425 mm

320 mm mooring spring made of galvanised steel guarantees non-yielding and long-lasting shock absorption. To be installed with a safety chain.

Diameter (Ø): 66 mm

Maximum length: 330 mm

Wire diameter: 6.5 mm

Maximum compression load: 200

For boats up to: 7 metres

For boats with a maximum weight of: 2000 kg

350 mm mooring spring made of galvanised steel guarantees non-yielding and long-lasting shock absorption. To be installed with a safety chain.

Diameter (Ø): 74 mm

Maximum length: 397 mm

Wire diameter: 7.5 mm

Maximum compression load: 250

For boats up to: 9 metres

For boats with a maximum weight of: 3,500 kg

The 380 mm mooring spring is a nautical shock absorber designed to guarantee non-fatigue and long-lasting shock absorption, offering effective protection against rope breakage during mooring.

Made of galvanized steel, it has an external diameter of 90 mm, a maximum length of 455 mm, a wire diameter of 9 mm, and a maximum compression load of 350 kg. The spring weighs approximately 2.7 kg and is suitable for boats up to approximately 11 m in length with a maximum hull weight of approximately 7000 kg. 

The 400 mm mooring spring is designed to guarantee non-yielding and long-lasting shock absorption capabilities, ensuring protection and efficiency during mooring operations. Made of high-strength galvanized steel, it offers strength and reliability even under continuous stress and demanding marine conditions. With an external diameter of 93 mm and a wire diameter of 11 mm, it has a maximum length of 406 mm and can withstand a maximum compressed load of 630 mm. It is suitable for boats up to 13 meters in length and weighing up to 10,000 kg, helping to reduce strain on ropes and preserve bollards and anchor points, improving overall mooring safety.

The 320 mm stainless steel mooring spring is the ideal accessory for mooring and anchoring boats, designed to absorb shocks and ensure a smoother and safer trim during navigation and mooring. Made of high-strength polished stainless steel, this spring is designed to last.

Total length: 320 mm

External spring diameter: 62 mm

Wire diameter: 6 mm

Maximum compression load: approx. 140 kg

Weight: approx. 0.6 kg

Recommended boats: up to 7 m

The 380 mm stainless steel mooring spring is an essential component for those who want to properly cushion the stress between the boat and the quay during mooring. Made of high-strength polished stainless steel, it offers excellent resistance to marine corrosion and long life even in difficult conditions. The 380 mm long version with a 9 mm wire diameter is ideal for boats up to approximately 11 m in length and weighing up to 7000 kg, ensuring reliable performance with compression loads of up to 250 kg. 

The 390 mm stainless steel mooring spring is the perfect accessory for absorbing stress between the quay, bollards and fenders during mooring. It is made of high-strength polished stainless steel, ideal for withstanding the marine environment. Its length of 390 mm and spiral diameter of Ø 89 mm make it suitable for boats up to approximately 13 m in length and weighing up to 10,000 kg. The polished stainless steel construction also gives it a neat and durable appearance, perfect for any type of pleasure boat.

The AISI 316 stainless steel joint for Ø 6-8 mm chains is an essential accessory for those who want a smoother and more reliable anchorage without metal protrusions that can get caught. Designed to securely connect the chain to the anchor, this joint allows the chain to slide easily through the bow roller.

Made of high-quality AISI 316 stainless steel, it guarantees excellent resistance to marine corrosion.

Main dimensions:

B: 10 mm

C: 7 mm

L: 16 mm

G: 22 mm

P: 9 mm

H (total height): 90 mm

The AISI 316 stainless steel joint for Ø 9-10 mm chains is an essential accessory for those who want a smoother and more reliable anchorage without metal protrusions that can get caught. Designed to securely connect the chain to the anchor, this joint allows the chain to slide easily through the bow roller.

Made of high-quality AISI 316 stainless steel, it guarantees excellent resistance to marine corrosion.

Main dimensions:

B: 13 mm

C: 11 mm

L: 19 mm

G: 29 mm

P: 11 mm

H (total height): 115 mm

Adapter for 12 mm rope and 8 mm chain. Designed to connect the anchor chain to the rope, avoiding knots, or for stern moorings. Made of mirror-polished AISI 316 stainless steel. 

The 16/10 mm Rope/Chain Connector is designed to securely join your anchor chain to the corresponding rope, eliminating bulky knots and ensuring smoother, safer operation. Also ideal for stern mooring setups.

Manufactured from mirror-polished AISI 316 stainless steel, it delivers maximum corrosion resistance and long-lasting performance in harsh marine environments.

Key Features

• ✔ For 10 mm chain

• ✔ For 16 mm rope

• ✔ Clean, knot-free connection

• ✔ Premium marine-grade stainless steel finish

The Classic 695 mm Heavy Duty Windlass is designed to ensure maximum strength and reliability during anchoring operations. Made of polished stainless steel, it ensures high corrosion resistance and long life in marine environments.

Thanks to its reinforced structure and nylon pulleys, it allows smooth chain sliding and easier anchor retrieval, even with heavy loads.

Why choose it

✔ Heavy-duty construction for anchors up to 30 kg

✔ Salt-resistant stainless steel

✔ Smooth and silent sliding

✔ Ideal for robust and professional installations

Reliable, durable and designed for those seeking safety and performance in every anchorage.

The Classic Heavy Duty Hinged Bow Roller – 595 mm is built for strength and reliability during anchoring operations. Made from polished stainless steel, it offers excellent corrosion resistance and long-lasting performance in harsh marine environments.

Its reinforced structure and nylon sheaves ensure smooth chain movement and easier anchor deployment and retrieval—even with heavier anchors.

Why choose it

• ✔ Heavy-duty construction for anchors up to 30 kg

• ✔ Corrosion-resistant stainless steel

• ✔ Smooth and quiet chain operation

• ✔ Ideal for solid, professional installations

Reliable, durable, and designed for maximum anchoring performance.

The Classic Heavy Duty Hinged Bow Roller – 695 mm is built for strength and reliability during anchoring operations. Made from polished stainless steel, it offers excellent corrosion resistance and long-lasting performance in harsh marine environments.

Its reinforced structure and nylon sheaves ensure smooth chain movement and easier anchor deployment and retrieval—even with heavier anchors.

Why choose it

• ✔ Heavy-duty construction for anchors up to 30 kg

• ✔ Corrosion-resistant stainless steel

• ✔ Smooth and quiet chain operation

• ✔ Ideal for solid, professional installations

Reliable, durable, and designed for maximum anchoring performance.

The Mr. Fantastic Extendable Anchor Roller is built in mirror-polished stainless steel and engineered to make anchoring smoother and safer. Thanks to its gas-spring assisted system, the roller extends outward before anchor deployment, keeping the anchor safely clear of the bow during launch and retrieval.

• ✔ Gas-assist mechanism for effortless, controlled deployment

• ✔ Extends forward to protect the bow from impact

• ✔ Premium polished stainless steel construction

• ✔ Designed for anchors from 7.5 to 10 kg

Performance, protection, and style—an upgrade that enhances both functionality and the look of your boat.