List of products by brand Osculati

The 12 mm Stainless Steel Connecting Link is made of high-quality stainless steel and designed for calibrated chain applications.

It provides a secure and reliable connection, with a breaking load of 2,780 kg, ensuring strength and durability in marine environments.

Dimensions: A1 19 mm – A 42 mm – L 38 mm.

The Twist Swivel Connector for 10/12 mm chain, made of mirror-polished AISI 316 stainless steel, is designed to ensure correct anchor alignment during retrieval.

With modern asymmetric anchors (Bruce, Delta, Trefoil®, etc.), the anchor often reaches the bow roller in the wrong position. The Twist system automatically rotates the anchor into the correct orientation as it enters the bow roller or hawse pipe, ensuring smoother and safer operation.

A shackle connects the fixed eye to the anchor.

Dimensions: A 320 mm – B 83 mm – C 38 mm.

The Trimmer Anchor Swivel Connector for 10/12 mm chain, made of polished AISI 316 stainless steel, is designed to provide maximum safety and smooth operation during anchoring maneuvers.

Thanks to its double articulation system, it eliminates the lever effect when the anchor is set, while the anti-oscillation connection ensures smoother retrieval near the bow roller.

Equipped with safety screws, it offers a lateral load capacity up to three times higher than standard swivels and a breaking load of 8,500 kg.

Dimensions: A 230 mm – B 22 mm – C 20/30 mm.

The Trimmer Anchor Swivel Connector for 12 mm chain, made of polished AISI 316 stainless steel, is designed to provide maximum safety and smooth operation during anchoring maneuvers.

Thanks to its double articulation system, it eliminates the lever effect when the anchor is set, while the anti-oscillation connection ensures smoother retrieval near the bow roller.

Equipped with safety screws, it offers a lateral load capacity up to three times higher than standard swivels and a breaking load of 12,000 kg.

Dimensions: A 235 mm – B 27 mm – C 30/50 mm.

The 8 mm stainless steel swivel shackle in micro-cast AISI 316 stainless steel is designed to connect chains and anchors securely, durably and without taking up space. The design without protrusions facilitates lifting through the bow roller, preventing it from getting caught as happens with traditional shackles.

Reinforced model with extra finish, exclusive to Osculati, guarantees maximum reliability and durability. Suitable for Ø 6/8 mm chain, with a breaking load of 3500 kg (dimensions shown in photo).

The 20 kg Trefoil Anchor Shackle in micro-cast AISI 316 stainless steel is the ideal solution for connecting chains and anchors safely and without clutter. Thanks to its protrusion-free design, it facilitates ascent through the bow roller, preventing snagging, unlike traditional shackles.

Reinforced model with extra finish, guarantees strength and reliability over time. Exclusive to Osculati, suitable for Ø 6/8 mm chain (measurements in photo).

Maxi version swivel connection made of mirror-polished AISI 316 stainless steel, designed for secure connection between anchor and chain on medium and large boats. The sturdy construction and high-quality materials guarantee maximum resistance to high loads and corrosion in marine environments.

Breaking load:

9470 kg

Dimensions:

B: 19 mm

C: 14 mm

L: 29 mm

G: 30 mm

P: 23 mm

H: 140 mm

Two-joint swivel made of AISI 316 stainless steel, designed to ensure maximum strength, reliability, and durability in marine environments. The compact, protrusion-free structure reduces the risk of snagging and ensures optimal alignment between the anchor and chain, improving the efficiency of the anchoring system. Compatible with 6/8 mm chain.

Dimensions:

Total length: 117 mm

B: 9 mm

C: 8 mm

L: 16 mm

G: 21 mm

P: 10 mm

H: 95 mm

Two-joint swivel made of AISI 316 stainless steel, designed to ensure maximum strength, reliability, and durability in marine environments. The compact, protrusion-free structure reduces the risk of snagging and ensures optimal alignment between the anchor and chain, improving the efficiency of the anchoring system. Compatible with 9/10 mm chain.

Dimensions:

Total length: 155 mm

B: 13 mm

C: 10 mm

L: 19 mm

G: 28 mm

P: 13 mm

H: 120 mm

6 mm chain clover. It hooks onto the chain link and relieves the winch of the mooring effort. Made of polished 316 stainless steel. 

10 mm chain clover. It hooks onto the chain link and relieves the winch of the mooring effort. Made of polished 316 stainless steel. 

Kit di ritenuta ancora progettato per catena Ø 10/12 mm, ideale come sistema di sicurezza durante la navigazione. Il kit è composto da golfare (Pad-Eye), cinghia ad alta resistenza e moschettone, offrendo una soluzione pratica ed efficace per bloccare l’ancora ed evitarne la caduta accidentale.

Realizzato interamente in nastro tecnico, è totalmente inossidabile, non graffia le superfici e non produce rumori sulla coperta, a differenza dei sistemi metallici tradizionali. Le cuciture in nastro riflettente garantiscono maggiore visibilità notturna, aumentando la sicurezza a bordo.

Si installa in prossimità del verricello come ritenuta di sicurezza dell’ancora durante la navigazione.

Lunghezza: 25 cm.

Consisting of a spring-loaded ON-OFF-ON switch + waterproof rubber cap + circular ‘Windlass Control Up-Down’ plate.

It does not directly control the winch, but must be connected to a remote control switch.

Windlass circuit breaker kit. Fitted with a spring ON-OFF-ON switch, a watertight rubber cap + a circular Windlass Control Up-Down plate.

Does not directly control the winch, but must be connected to a remote switch. 

80 A bipolar inverter designed to control anchor winches with 3- or 4-wire permanent magnet motors. This power unit guarantees reliability, safety and high performance, making it ideal for nautical installations on both pleasure boats and professional vessels.

Thanks to its IP56 protection rating, it is fully compatible with foot, hand or portable controls, offering maximum flexibility of use.

Designed for motors up to 700 W and 2- or 4-pole configurations, this inverter is compatible with the original MZ Electronic 2090/L model, facilitating replacements and retrofits without modifications to the system.

All technical specifications are available in the section below the image.

12 V remote control switch (red) designed to control winches and other high-power deck equipment. Manufactured to ensure reliability and safety in marine environments, it comes complete with a rubber-coated foot pedal and mirror-polished stainless steel ring nut, with perfect watertight sealing.

Compatible with foot switches, manual controls and panel controls, it offers great versatility in installation and use.

Voltage: 12 V

Maximum power: 2000 W

Structure: rubber foot switch with polished stainless steel ring nut

Seal: watertight

Ideal for marine systems that require a robust, safe and efficient control.

High performance contactor, ideal for marine applications and environments exposed to harsh conditions.

Complete with rubber pedal and mirror-polished stainless steel ferrule, it guarantees watertightness and maximum reliability even in damp or salty environments.

Power support up to 2000W - a solid, safe and versatile component for demanding installations.

Control panel for spring-return winches, designed to ensure safe and reliable control of anchoring manoeuvres. It is equipped with a rubber-coated ‘Up/Down’ switch that is completely watertight, with automatic spring return for precise and immediate movement control.

The panel includes a safety fuse holder with a 6×32 mm glass fuse and two LED indicator lights to check the operating status.

It does not directly control the winch, but must be connected to a remote control switch for the system to function correctly.

Protection rating: IP56

Dimensions: 80 × 60 mm

Fuse: 6×32 mm glass

Compact and durable, it is ideal for marine installations.

Robust and refined, the stainless steel/red foot switch is designed to offer maximum reliability even in the most demanding environments. Completely sealed, it allows the installation of contactors in areas protected from humidity, thus guaranteeing a longer life and safety of the system.

The upper part is made of mirror-polished AISI 316 stainless steel, a material known for its resistance to corrosion, particularly suitable for applications in the nautical or industrial environment.

Compact and discreet, it measures 76 x 83 mm, with a height of only 16 mm, making it ideal for floor installations where practicality is required without sacrificing aesthetics.

Robust and refined, the stainless steel/black foot switch is designed to offer maximum reliability even in the most demanding environments. Completely sealed, it allows the installation of contactors in areas protected from humidity, thus guaranteeing longer life and safety of the system.

The upper part is made of mirror-polished AISI 316 stainless steel, a material known for its resistance to corrosion, particularly suitable for applications in the nautical or industrial environment.

Compact and discreet, it measures 76 x 83 mm, with a height of only 16 mm, making it ideal for floor installations where practicality is required without sacrificing aesthetics.

2-channel HC control panel, designed to control any type of winch or gangway. Reliable and practical, it allows precise control of on-board manoeuvres, ensuring maximum safety and ease of use.

Perfectly watertight, it is ideal for marine environments and effectively resists exposure to water and humidity. It is equipped with an extendable cable up to 4 metres, which ensures freedom of movement during operations.

Channels: 2

Power supply: 12/24 V

Protection rating: IP67

Dimensions: 170 × 80 × 50 mm

Compact, robust and versatile, it is an ideal solution for remote control of the main deck utilities.

Magnet kit to be installed inside the winch's barbotin, designed to detect chain movement and ensure the correct functioning of the metre counting systems.

Supplied with a 2-metre connection cable, it guarantees practical and reliable installation. Ideal as a spare part or addition to existing systems, it ensures precision and continuity in chain control during anchoring manoeuvres.

Clutch release lever for LEWMAR winches, universal for all Lewmar winches, made of black plastic.

High-performance flush-mounted thermal switch 100A, ideal for protecting marine electrical systems and battery lines. It combines the functions of a fuse and switch in a single device, allowing manual tripping and resetting via a practical lever, for quick and safe restoration without the need for replacement.

Manufactured in compliance with SAEJ1171 and CE 28846 ‘Vapor Proof’ standards, it guarantees maximum reliability even in harsh marine environments. The IP66 protection rating ensures high resistance to water and external agents, while the flush-mounted installation simply requires a circular hole, making it practical and clean.