MAINTENANCE AND CARE
VOLVO PENTA COOLANT READY MIXED 5LT 22567233
Diesel and gasoline starter motor ML.200.
Cold starting spray for diesel and petrol engines. Mixture of sulphur esters and aliphatic solvents.
Specially developed to facilitate cold starting of any engine by enriching the air-fuel mixture and anticipating ignition. Suitable for petrol and diesel engines. Allows engine starting during the winter season.
Ensures easy ignition even at low temperatures. Avoids battery wear.
With the engine switched off, spray the product for a few moments inside the air intake near the filter or directly on the air filter and start the engine. Do not spray for more than 3 to 4 seconds consecutively.
CRC CONTACT CLEANER Spray 250ml
CRC ELECTRO 2-26 contact reactivator lubricant - 250 ml.
Multi-purpose water repellent CRC 5-56 - 250 ml
Degreasing Cleaner CFG BLASTER NAUTICA - 750 ml
WD-40 Penetrant Spray 200ml
- Multi-function product
- Cleans and protects
- Eliminates squeaks
- Loosens rusted parts and stuck mechanics
- Protects against corrosion
- Drives out moisture
- Silicone, resin, and PTFE-free
- Subdues layers of rust, dissolves stuck mechanics and fixed parts of vehicles and machines
- Removes stubborn dirt
- Redirects moisture from electrical contacts and prevents creep currents
- Leaves a thin protective film that prevents the formation of moisture and rust on metal parts
Multifunctional lubricant WD-40 - 400ml
WD-40 RELEASE AGENT ML.500
- Multi-function product
- Cleans and protects
- Eliminates squeaks
- Loosens rusted parts and stuck mechanics
- Protects against corrosion
- Repels moisture
- Silicone, resin, and PTFE-free
- Dissolves layers of rust, loosens stuck mechanics and vehicle and machine parts
- Removes stubborn dirt
- Moves moisture from electrical contacts and prevents creep currents
- Leaves a thin protective film that prevents the formation of moisture and rust on metal parts
WHITE SPIRIT THINNER 0.5L FOR SPINNAKER
Specific thinner for Spinnaker Yacht Varnish. Only add to the first coat on new or restored wood. Add 10 to 40% depending on the hardness and characteristics of the wood. Apart from the first coat, subsequent coats must be applied without thinning. Subsequent coats can be used for brush maintenance and cleaning. Dry the brush well before re-use in subsequent coats.
Single-component.
0.5 litre pack.
THINNER 6610 LT. 0.500
Thinner is a volatile liquid whose function is to dissolve and disperse the various components, lower viscosity, and facilitate product application. The evaporation of the solvent is essential for the correct spinning of the binder, facilitating the formation of a homogeneous film, hence the importance of using thinners correctly.
Thinner 6610 is suitable for diluting Adherpox, Epomast Spray, Plastolite Pro, Unikote PRO; only
for cleaning tools used for the application of Aquastop, Ceramite Yachting, Ecoplast, Epomast, Epomast Pro, Epomast Rapido, Resin 2000, and Subcoat S.
HELICESTOP PRIMER 250 ML
Quick drying paint based on modified epoxy resin, designed as a primer for direct adhesion on metals such as brass, aluminum, bronze and stainless steel, properly prepared. “Helicestop Primer” is suitable for overpainting with both single-component and two-component products and in particular has been designed as an anchoring primer for boat propellers, flaps, stern drives and shafts, with reference to the subsequent coating with the special antifouling “HELICESTOP A.F.”.
All surfaces: All surfaces to be treated must be adequately cleaned in order to eliminate any traces of dirt, be perfectly free from oils and greases and any type of contaminant.
MARLIN N.2 thinner 0.5l
NITRO THINNER 1 LITER
Nitro Thinner 1 LT Nitro thinner is a special liquid consisting of a mixture of solvents. It is a very powerful solvent that is widely used in paints and varnishes precisely because of its bleaching capabilities. The composition of nitro thinners includes toluene, acetone, dichloropropane and highly flammable substances as main components. Nitro thinner is a very aggressive product, so care must be taken when using it not to inhale it or come into direct contact with it. It is also used as an all-purpose thinner to dilute rust removers, synthetic enamels and paints, and is also considered a very good product for some cleaning work, to remove traces of glue from parquet and stucco residues.
NITRO THINNER 0.5 L
NITRO THINNER LT.20
Nitro Thinner 20 LT. Nitro thinner is a special liquid consisting of a mixture of solvents. It is a very powerful solvent that is widely used in paints and varnishes precisely because of its bleaching capabilities. The composition of nitro thinners includes toluene, acetone, dichloropropane and highly flammable substances as main components. Nitro thinner is a very aggressive product, so care must be taken when using it not to inhale it or come into direct contact with it. It is also used as an all-purpose thinner to dilute rust removers, synthetic enamels and paints, and is also considered a very good product for some cleaning work, to remove traces of glue from parquet and stucco residues.
SYNTHETIC THINNER 1 liter
Synthetic thinner 1 LT. Formulated from highly selected raw materials, it is used for the dilution of synthetic enamels and, due to its slow evaporation, gives gloss and dilatation to the paint product. Due to its high solvent power, the synthetic thinner can also be used for cleaning paint guns, paint brushes and paint soiled tools. Due to its characteristics
of purity, the product is stable and does not deteriorate.
EPOXY THINNER 5 LITERS
EPOXY THINNER
SIZE: 5 LITERS
PRIMER STOPPANI RESOLUTION METALLIZED GOLD 0.75L
first hull
antifouling primer
PRIMER STOPPANI RESOLUTION METALLIC GOLD 2.5L
first hull
antifouling primer
DILUENT 277 STOPPANI 500 ml
THINNER
THINNER 277 STOPPANI LT.1
Traditional thinner for brush application of:
glazes,
primers,
rust inhibitors,
paints and one-component polyurethanes.
Traditional thinner for brush application of:
1 LT tin