MAINTENANCE AND CARE
1 kg of white Gealcoat with catalyst and paraffin.
5 kg white Gealcoat with catalyst and paraffin
Polyester Resin Aropol 102 1 Kg with catalyst.
Polyester Resin Aropol 102, 20 Kg with catalyst.
Polyester Resin Aropol 102 5 Kg with catalyst.
PLASTER SIX "SOLUTION A" FROM LT.2.5
PLASTER SIX "SOLUTION B" FROM LT.2.5
FIBERGLASS PUTTY 1.2 KG
CATALYST x RESIN IN 1 KG FORMAT
resin catalyst
EPOXY RESIN "REPOX 2010" TRANSPARENT ml.750
"EPOXY RESIN REPOX 2010" TRANSPARENT FROM LT.1.5
FAST EPOXY RESIN 150 gr TUBE
FILL LIGHT PLUS EVO OF 1LT (0.5 + 0.5)
Two-component super lightweight epoxy putty for high thicknesses, solvent-free, can be mixed by hand or with suitable mixing machines, with excellent spreadability and final flexibility after curing. It allows obtaining high thicknesses for each layer of applied product without problems of dripping or shrinkage during polymerization. It is used on any type of support (steel, aluminum, composites or wood), to level defective surfaces without weighing down the boat, even if used in large quantities. It has excellent sandability, high adhesion, high values of mechanical resistance once dried and is suitable above and below the waterline, if used according to the provided technical instructions. 1 LT jar.
TEAK CREAM
Teak cream allows you to restore a natural appearance to a teak that has been greyed by the sun and sea moisture without having to use additional wood preparation products such as oil and/or regenerator, all you need to do is to have properly cleaned the part to be treated. It can be used in one or two coats depending on the desired appearance and durability. Apply generously with a brush to allow the product to penetrate, then remove the excess by wiping the substrate with a clean, dry cloth.
Euromeci Pen Teak Cleaner 1 liter Teak Cleaning Detergent
Teak Fast 400 ml Euromeci Pen Tea Stain Remover Spray.
Euromeci Pen Teak protective oil 4 lt
PEN TEAK OIL is a special blend to be used on unvarnished wood surfaces, indoors and outdoors, where natural oils have been removed by weathering. Ensure that the surface to be treated is clean and dry. Apply it by brushing or cloth, and remove excess after saturation. If necessary apply a second coat.
4LT