HYDRAULICS AND PLUMBING

Active filters

€48.98
€69.97 -30%
Last items in stock

This pump is designed to facilitate the refuelling and transfer of fuel and liquids. Available with AA battery power. Equipped with a sensor that automatically stops it when the tank is filled. It can be used for transferring (non-potable) water, petrol, diesel, antifreeze, light oil, detergents etc.

Comes with 4 AA batteries (3 volts not included); max. flow rate GPM l/min 2.4-9; max. head 9 m.

€125.91
€179.86 -30%
Last items in stock
Self-priming washing pump with automatic adjustment of both flow and pressure, reducing consumption. Thanks to the presence of the by-pass valve, the pulsating effect is minimized and the pump is much quieter. The autoclave is equipped with rubber feet to prevent corrosion and noise, and a thermal switch on the motor that stops it in case of accidental overheating and can run dry without causing any damage. Power supply 12 Volt. Flow rate 20 lt/min - 5.5 GPM. Dimensions 221.5 x 146 x 131.8 mm. Block pressure 70 PSI - 4.8 bar.
€15.36
€21.95 -30%
Last items in stock

GIBSY 1100 24V submersible bilge pumps are designed for on-board reliability and efficiency, ideal for use on small boats and inflatable craft. CE-certified, they are made of corrosion-resistant ABS to ensure long life even in demanding marine environments.

The compact design (height 107 mm, base diameter 61 mm) allows easy installation even in the smallest spaces, while simplifying maintenance operations.

With a maximum flow rate of 4,165 litre/hour and consumption of only 1.5A, the GIBSY 1100 is an efficient and functional choice. The 1 ⅛" (29 mm) hose nozzle diameter ensures a rapid and constant flow.

€47.10
€67.28 -30%
Last items in stock

Shower drainage pump designed for use on boats with built-in sink, shower, or bathtub, to pump all the water from the drains into the collection tank. Compact, it can be floor-mounted or wall-mounted, in the latter case by removing the two supports. It is equipped with a built-in automatic bilge pump that activates as soon as the float detects the presence of water. It also has a filter that can be easily cleaned by removing the transparent top cover and is equipped with a check valve connected to the discharge pipe.

Dimensions 334 x 215 x 115 h mm

€230.29
€328.99 -30%
Last items in stock

Conversion kit from manual to electric WC, quieter than commercially available electric WCs and more powerful.

The kit includes base with 360° swivel flush connection, pump, electric motor, control panel, non-return valve and fittings.

The kit is compatible with the following toilet brands:

- Motomarine

- Jabsco

- TMC

- Raritan

- RM69

- Johnson Pump

- Lalizas

- ThetFord.

€20.35
€29.07 -30%
Last items in stock

This practical safety alarm with both visual and acoustic signals is the ideal solution for continuously monitoring the proper operation of a pump or float switch.
Its high-visibility LED and powerful buzzer (≥95 dB) allow you to instantly detect any malfunction, ensuring maximum safety and reliability in all conditions.

Compact and easy to install, thanks to its 56 mm mounting hole and 62x62 mm overall dimensions, it fits perfectly into control panels and electrical boxes.
Operating at 12V and supporting up to 20A, it’s ideal for marine, industrial, or domestic applications where monitoring pumping or drainage systems is essential.

€20.35
€29.07 -30%
Last items in stock

This practical safety alarm with both visual and acoustic signals is the ideal solution for continuously monitoring the proper operation of a pump or float switch.
Its high-visibility LED and powerful buzzer (≥95 dB) allow you to instantly detect any malfunction, ensuring maximum safety and reliability in all conditions.

Compact and easy to install, thanks to its 56 mm mounting hole and 62x62 mm overall dimensions, it fits perfectly into control panels and electrical boxes.
Operating at 24V and supporting up to 10A, it’s ideal for marine, industrial, or domestic applications where monitoring pumping or drainage systems is essential.

€169.95
€242.78 -30%
In Stock
  • Consumption: 4.8 A
  • Dimensions: D. 100x153 h mm.
  • Hose fitting: 28 mm
  • Max flow rate: 95 L/min.
  • Pump type: Submersible
  • Volt: 12 V

Rule 1500 Pump - (original code 02) Submersible bilge pump for medium and large boats with a flow rate of 95 liters/minute, capable of quickly emptying any collection well. The Rule 1500 is a submersible pump of extremely high quality, designed to work and last long.

  • Snap-on base for easy inspection and cleaning
  • High flow rate, approximately 6000 liters/hour
  • Max head: 3 m
  • The Rule 1500 has the highest quality available on the market today
  • 28 mm outlet hose
  • Dimensions: 100x100x153h mm
  • The Rule 1500 pump is available in 12V or 24V
€189.58
€270.83 -30%
In Stock
  • Consumption: 3.7 A
  • Dimensions: D. 100x153 h mm.
  • Hose fitting: 28 mm
  • Max Flow Rate: 95 L/min.
  • Pump Type: Immersion
  • Volt: 24 V

Rule 1500 Pump - (original code 03) Submersible bilge pump for medium and large boats with a flow rate of up to 95 liters per minute, capable of quickly emptying any collection well. The Rule 1500 is a submersible pump of extremely high quality designed to work and last long.

  • Snap-on base for easy inspection and cleaning
  • High flow rate, approximately 6000 liters/hour
  • Max head: 3 m
  • The Rule 1500 has the highest quality available in the market
  • 28 mm discharge tube
  • Dimensions: 100x100x153h mm
  • The Rule 1500 pump is available in 12V or 24V
€243.39
€347.70 -30%
In Stock
  • Consumption: 8.4 A
  • Dimensions: Base 105x155 h mm.
  • Fuse: 15 A
  • Hose Outlet: 28 mm
  • Max Flow Rate: 120 L/min.
  • Pump Type: Submersible
  • Volt: 12 V

Rule 2000 Pump - (original code 10) Submersible bilge pump for medium-large boats, suitable for quickly emptying the bilge or any water collection well. The Rule 2000 pump has the highest quality available on the market and is designed to work and last a long time. The Rule 2000 is available in both 12 V and 24 V

  • High Flow Rate: 120 liters/minute
  • Head: up to 3 meters
  • Removable snap-on base for inspection and cleaning
  • Motor tested for up to 2500 hours of work
  • High quality-to-price ratio!
  • Outlet tube of 28 mm.
  • Dimensions mm: D. 105x155h
€247.66
€353.80 -30%
In Stock
  • Consumption: 4 A
  • Dimensions: D. 105x155 h mm.
  • Fuse: 7.5 A
  • Hose fitting: 28 mm
  • Max Flow: 120 L/min.
  • Pump Type: Immersion
  • Volt: 24 V

Rule 2000 Pump - (original code 12) is a submersible bilge pump for medium to large-sized boats, suitable for quickly emptying the bilge or any water collection well. The Rule 2000 pump has the highest quality available on the market and is designed to work and last long. The Rule 2000 is available in both 12 V and 24 V.

  • High Flow: 120 liters/minute
  • Head: up to 3 meters
  • Removable snap-in base for inspection and cleaning
  • Motor tested up to 2500 hours of operation
  • High quality-to-price ratio!
  • 28 mm outlet hose
  • Dimensions mm: D. 105x155h
€367.13
€524.48 -30%
Last items in stock
  • Consumption: 15.5 A
  • Dimensions: D. 135x180 h mm.
  • Hose fitting: 38 mm.
  • Max Flow Rate: 220 L/min.
  • Pump Type: Submersible
  • Volt: 12 V
  • Exclusive long-lasting Rule motor with permanent lubrication bearings and water cooling
  • Double insulation on the shaft
  • Extremely robust acetal housing
  • Max flow rate: 220 l./min
  • Head: 4 meters
  • Snap-on base for easy inspection and cleaning
  • Dimensions mm.: D. 135x180h
  • 38 mm outlet tube
  • The Rule 3700 is available in 12V or 24V