Radio stereo with USB/Bluetooth and remote control.
€157.14
€224.48
-30%
General Nautica Catalog 21 Knots
- MOORING AND SAFETY
- Translate into English and return only the translated text: 1
- TENDER, ENGINES AND ENGINE FITTINGS
- ON-BOARD ELECTRONICS.
- MAINTENANCE AND CARE
- ON-BOARD INSTRUMENTATION
- HARDWARE AND DECK EQUIPMENT
- KITCHENS, FRIDGES, ONBOARD COMFORT, AND SANITARY FACILITIES.
- WATERSCOOTER, INFLATABLES, CLOTHING
- Kissed
- Peak Anchorage Mooring
- rings, hooks and eyelets
- Nautical gift items
- Street lights.
- Depth lights
- Motor Start Switches
- Sassole and turafalle
- Waterproof cases
- Portable waste sorting machines
- Fixed sonar
- Wind vane
- Cables and remote control boxes
- Campigaz cylinders and accessories
- Driving console, Formwork, Dashboards
- kitchens and cooktops
- Kitchen accessories
- Mufflers and exhaust pipes
- Soundproofing materials
- Silicon anti-aging.
- Stopper and Organizer.
- All nautical teak.
- CMT.CMT10.
- CLAMPS
- REDANCE AND BALLASTING
- sandhoppers
- rings
- hooks and eyes
- Fuses.
- Fasten
- Clamps and Terminals
- cable ties and drain plugs
- Universal tanks
- water and accessories
- OIL FILTERS
- AIR
- WATER
- DIESEL FOR ENGINES
- Portals
- inspection plugs
- rooms
- etc.
- KITCHENS
- FRIDGE
- COMFORT ON BOARD AND SANITARY FACILITIES
- CRANES AND GANGWAYS
- ANODES FOR AXLES
- FEET AND ROTORS
- Driving console
- Formwork
- Planks
- ENGINES AND ENGINE EQUIPMENT
- Oils
- Fats and additives
Trending products
Special products
Garmin Striker Vivid 7SV with GT20-TM Transducer
€522.00
€600.00
-13%
The shop
HARDWARE STORE
ROUND FLANGED TIP mm. 30
€0.15
In Stock
FLUTED ROUND TIP Ø mm 30.
The images are for illustrative purposes only.
Aerator Thread 22 x 1
€0.70
In Stock
Aerator 22x1 thread.
ANTIVIBRATING MALE FOOT THREAD M8 x 23 mm. 40x30
€2.40
In Stock
Cylindrical anti-vibrators are made of a natural rubber cylinder and a galvanized steel reinforcement. Characterized by a radial elasticity higher than the axial one, they can work in compression or in shear depending on the mounting conditions. It is the simplest anti-vibrator, with minimal dimensions, and is classified based on the type of fastening and the dimensions of the threaded parts.
RUBBER HARDNESS: 60 Sh
DIMENSIONS:
D: 40
H: 30
G: M8
Z: 23
ANTIVIBRATION MM THREAD M8 x 23 mm. 30 x 25
€1.90
Last items in stock
Cylindrical vibration dampers consist of a natural rubber cylinder and a galvanised steel reinforcement. Characterised by a higher radial elasticity than axial elasticity, they can work in compression or shear depending on the installation conditions. It is the simplest vibration-damping element with the smallest footprint and is categorised according to the type of attachment and the dimensions of the threaded parts. DIAMETER 30 MM, LENGTH 25 MM, MALE/MALE THREAD M8 GAMM.
Transparent adhesive PVC bumpers mm.13x4 pack of 20 pieces.
€1.40
In Stock
Transparent PVC bumpers. Dimensions: 13X4 mm. Packaging of 20 pieces.
PVC transparent adhesive bumper mm. 20x6.2 pack of 6 pieces
€2.93
Disponibile a breve
Transparent pvc bumper. Dimensions: 20X6.2 mm. Pack of 6 pcs.
ADHESIVE BUMPERS TRANSPARENT PVC mm.22,3 x 10 pack of 4 PCS.
€2.50
Last items in stock
Transparent pvc bumper. Dimensions: 22,3X10 mm. Pack of 4 pcs.
Bent XZN key M6 l.80.
€3.50
Last items in stock
The bent M6 XZN key is a tool designed to tighten or loosen XZN profile screws, a type of six-lobed hexagonal profile. The key is designed for M6 size screws. The key is bent, which may indicate a curved or angled shape. The total length of the key is 80 mm.
Bent M8 XZN key, l.90
€4.71
In Stock
The folded XZN key M8 is designed to fit screws or bolts with a six-lobed hexagonal profile. The key is designed for M8 size screws. The total length of the key is 90 mm.
Socket spanner 1/4 PH2 L.28 koken
€8.89
In Stock
The PH2-tipped 1/4’ socket spanner, 28 mm long, from the Koken brand, distributed by FERMEC, is a high quality accessory designed to ensure maximum precision and reliability when screwing.
Made from strong and durable materials, this sleeve ensures excellent torque transmission, reducing the risk of wear and slippage. Compatibility with 1/4’ sockets makes it ideal for use with screwdrivers, ratchets and torque spanners, offering versatility in both professional and DIY applications.
With its compact 28 mm length, it is perfect for working in tight spaces without compromising efficiency and safety
Socket spanner 1/4 PH3 L.28 koken
€8.89
In Stock
Philips 1/4 PH3 Phillips socket spanner, length 28 mm.
JOINT 1/4’ LENGTH 33, 1/4 KOKEN.
€21.27
Last items in stock
JOINT 1/4’ LENGTH 33, 1/4 KOKEN.
Compass att. 1/2‘’ Polygonal long mm.18
€6.40
Last items in stock
The 18 mm long Chrom-Vanadium 1/2‘’ polygonal socket is a high quality tool designed for professional and hobby use. Made of Chrom-Vanadium steel, an alloy that guarantees strength and durability, this socket is perfect for tackling even the toughest jobs. Its polygonal shape allows an excellent grip on screws or bolts, reducing the risk of damaging them. The 1/2‘’ socket is a common standard, compatible with most ratchet spanners and hand tools. With a length of 18 mm, the socket offers greater access depth in tight spaces, making it ideal for operations on hard-to-reach components.
Set of 8 double-ended tube wrenches 6–22 mm
€26.71
Last items in stock
The 8-piece double tube wrench set is the ideal solution for those seeking reliability and practicality in tightening and maintenance tasks, سواء in professional or DIY applications.
Made from forged steel, these wrenches ensure high resistance to wear and long-lasting durability. The satin chrome finish provides enhanced protection against corrosion while giving a clean, professional look.
The set includes the following sizes: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, and 20x22 mm, covering a wide range of applications. The double-ended design offers two sizes per wrench, optimizing both space and convenience.
Supplied in a practical storage case
Set of 31 hexagonal attachments for 1/4" drive.
€9.15
In arrivo, puoi procedere al pre ordine
The 31-piece set with 1/4" hex drive inserts is a complete and versatile kit designed to meet a wide range of fastening and screwdriving needs. This set provides a comprehensive solution for anyone in need of a variety of 1/4" standard size hex drive inserts.
The set includes a selection of inserts made with high-quality materials, ensuring strength and durability over time.
The variety of inserts in the set allows for tackling different types of tasks, such as screwing or unscrewing hex, torx, crosshead screws, and more. The convenience of the set is also reflected in its organization, with a sturdy case or container that keeps all the inserts neat and easily accessible.
Spark plug spanner 3/8 mm.14 L.90 mm pol.
€16.60
In arrivo, puoi procedere al pre ordine
SPARK PLUG SPANNER 3/8’ 14MM L. 90MM .
Features:
- fine knurling for a perfect grip
- length 90 mm
- satin chrome finish
- outer Ø 18.5 mm
Sliding male square adapter 3/8" F X 1/2" M.
€4.03
In Stock
Sliding chrome adapter for use with extensions.
Set of 40 combined inserts.
€30.50
In arrivo, puoi procedere al pre ordine
SET 40 PIECES COMBINED INSERTS, the pieces are indicated in the photo.
SET OF 3 BRUSHES: BRASS, NYLON AND STAINLESS STEEL
€4.39
In Stock
The set of 3 brushes (brass, nylon, and stainless steel) is a practical and versatile solution for cleaning, maintenance, and residue removal on a variety of surfaces.
The kit includes:
- 1 brass brush, ideal for gentle cleaning of metal surfaces without scratching
- 1 nylon brush, perfect for more delicate materials or light dirt
- 1 stainless steel brush, suitable for more aggressive cleaning on rust and heavy deposits
All brushes feature a black plastic handle, designed to provide a comfortable and secure grip during use.
With a length of 175 mm
4-PIECE EXTRACTOR SET FOR BMW & MINI SAFETY BOLTS
€134.20
In arrivo, puoi procedere al pre ordine
This professional set is specifically designed for the removal of swivel-ring safety bolts fitted to BMW and MINI vehicles. Ideal for mechanics, body repairers and specialist workshops, the set enables fast and effective intervention even in the case of damaged bolts or without an original key.
The kit includes:
1.5 kg hammer, to ensure the necessary force for extraction.
Adjustable extractor, adaptable to different types of bolts.
Bolt extractor, designed to act precisely without damaging surrounding components.
Pin punch, useful to complete the disassembly work.
All tools are contained in a practical and durable plastic box.
INVESTMENT CASTING RING 3 X 20
€0.73
In Stock
Micro-cast ring made of stainless steel, durable and resistant over time. Each piece is carefully welded and polished to ensure a smooth and shiny finish. It measures 3x20 mm, making it suitable for various technical or decorative uses.
The product is sold individually; the photo is for illustrative purposes only and may not represent the exact quantity for sale.
PROTECTION PLATE
€10.86
In Stock
Protective profile plate against friction of mooring lines, made of chrome-plated brass.
Size 150x45.
WOOD RINGS 6X60
€4.27
In Stock
Wooden rings with dimensions of 6x60 are small circular components designed to be used in woodworking. The specification "6x60" indicates the dimensions of the ring, with an outer diameter of 6 millimeters and a length of 60 millimeters. These rings are commonly used for various applications related to woodworking, such as furniture construction, frame making, or other craft projects.
WOODEN RINGS 8X80
€3.05
In Stock
Wood rings with dimensions 8x80 are small circular components designed to be used in woodworking. The specification 8x80 indicates the dimensions of the ring, with an outer diameter of 8 millimeters and a length of 80 millimeters. These rings are commonly employed for various woodworking applications, such as furniture construction, frame manufacturing, or other craft projects.