Radio stereo with USB/Bluetooth and remote control.
€157.14
€224.48
-30%
General Nautica Catalog 21 Knots
- MOORING AND SAFETY
- Translate into English and return only the translated text: 1
- TENDER, ENGINES AND ENGINE FITTINGS
- ON-BOARD ELECTRONICS.
- MAINTENANCE AND CARE
- ON-BOARD INSTRUMENTATION
- HARDWARE AND DECK EQUIPMENT
- KITCHENS, FRIDGES, ONBOARD COMFORT, AND SANITARY FACILITIES.
- WATERSCOOTER, INFLATABLES, CLOTHING
- Kissed
- Peak Anchorage Mooring
- rings, hooks and eyelets
- Nautical gift items
- Street lights.
- Depth lights
- Motor Start Switches
- Sassole and turafalle
- Waterproof cases
- Portable waste sorting machines
- Fixed sonar
- Wind vane
- Cables and remote control boxes
- Campigaz cylinders and accessories
- Driving console, Formwork, Dashboards
- kitchens and cooktops
- Kitchen accessories
- Mufflers and exhaust pipes
- Soundproofing materials
- Silicon anti-aging.
- Stopper and Organizer.
- All nautical teak.
- CMT.CMT10.
- CLAMPS
- REDANCE AND BALLASTING
- sandhoppers
- rings
- hooks and eyes
- Fuses.
- Fasten
- Clamps and Terminals
- cable ties and drain plugs
- Universal tanks
- water and accessories
- OIL FILTERS
- AIR
- WATER
- DIESEL FOR ENGINES
- Portals
- inspection plugs
- rooms
- etc.
- KITCHENS
- FRIDGE
- COMFORT ON BOARD AND SANITARY FACILITIES
- CRANES AND GANGWAYS
- ANODES FOR AXLES
- FEET AND ROTORS
- Driving console
- Formwork
- Planks
- ENGINES AND ENGINE EQUIPMENT
- Oils
- Fats and additives
Trending products
Special products
Garmin Striker Vivid 7SV with GT20-TM Transducer
€522.00
€600.00
-13%
The shop
TOOLS AND UTENSILS
Z4 529-mm PIN POINT
€53.56
In Stock
Very high resistance of cutting edges to wear
SP Steel
4 cutting edges.
S=13X50 D=10X140
Z4 SP S.13X50 D.12X140 DX - POINT FOR PINS
€56.00
Last items in stock
529 mm pin tips. All technical details are indicated in the photos.
TECHNICAL FEATURES:
- Very high wear resistance of cutting edges
- SP steel
- 4 cutting edges.
PIN POINT Z4 SP S.13X50 D.14X140 DX
€62.22
Last items in stock
Cylindrical attack points for hinges. They have a high resistance of cutting edges to wear. They are made of SPe steel and have 2 Z2 cutting edges, 2 V2 scoring edges.
Further technical details are indicated in the photos.
PIN POINT Z4 SP S.13X50 D.15X140 DX
€60.39
Last items in stock
Pin tips 529 mm. All technical details are indicated in the photo.
TECHNICAL FEATURES:
Very high resistance of cutting edges to wear
SP steel
4 cutting edges.
RING C / SCREW M3 x BEARING CLAMPING B.6 mm
€4.27
In Stock
Clamping rings with M3 screw. Hole diameter 6 mm.
STRAIGHT ROUTER x MORTISING
€21.96
In Stock
Mortise cutting router bit.
2 tungsten carbide cutting edges.
Mortise cuts for hinges and anti-slip steps.
Suitable for natural wood and composites.
TRIMMING MILLING CUTTER WITH BEARING.
€27.45
Last items in stock
To cope with the most difficult situations, we have designed a series of truly essential milling cutters.
Diameter 9.5 mm
Cutting length 12.7 mm
Total length 55 mm
FRESAX TRIM WITH CUSHION.
€30.50
In Stock
Trimming milling cutter.
Tungsten carbide edges.
Diameter 12.7 mm.
Cutting length 25mm.
Length 70 mm.
FLUSH TRIM BIT WITH BEARING
€30.49
In Stock
To tackle the most difficult situations, we have designed a series of truly essential milling cutters.
Diameter 16 mm
Cutting length 19 mm
Total length 57 mm
TRIMMING MILLING CUTTER C/CUSC Z2 S.6 D.19X25X74,5 DX
€42.09
In Stock
Our axial cutting trim router has been designed to offer excellent performance and versatility in a wide range of applications. Made with high-quality materials and equipped with tungsten carbide inserts, they ensure superior durability and consistent performance over time. They are ideal for precision work on laminates, allowing for impeccable and detailed finishes. Additionally, thanks to their ability to work quickly and accurately to shape, they are also suitable for projects that require a high degree of precision and speed. It is always recommended to wear dust masks and eye protection devices during milling operations.
Further technical details can be found in the attached photos.
STRAIGHT CUT MILLING
€25.01
In Stock
To deal with the most difficult situations, we have designed a truly essential series of cutters.
Diameter 3 mm
Cutting length 8 mm
Total length 45 mm
STRAIGHT CUT MILLING
€25.01
In Stock
To cope with the most difficult situations, we have designed a series of truly indispensable cutters.
Diameter 4 mm
Cutting length 10 mm
Total length 45 mm
STRAIGHT CUT HSS MILL
€25.50
In Stock
To face the most difficult situations, we have designed a series of truly essential cutters. Diameter 5 mm. Cutting length 12 mm. Total length 51 mm.
STRAIGHT-CUT MILLING
€25.50
In Stock
To deal with the most difficult situations, we have designed a series of truly indispensable cutters. Diameter 6 mm. Cutting length 16 mm. Total length 50 mm.
STRAIGHT CUT HSS END MILL
€30.38
In Stock
To cope with the most difficult situations, we have designed a series of truly essential cutters.
Diameter 8 mm.
Cutting length 20 mm.
Total length 50.8 mm.
STRAIGHT CUT MILLING
€29.16
In Stock
To cope with the most difficult situations, we have designed a series of truly indispensable milling cutters.
Diameter 10 mm
Cutting length 20 mm
Total length 48 mm
STRAIGHT CUTTING MILLING
€27.45
Last items in stock
To tackle the most difficult situations, we have designed a series of truly indispensable cutters. Diameter 12 mm. Cutting length 20 mm. Total length 50 mm.
CMT Straight Cutting Router Bit S6 D13X20X57 - DX
€37.82
In Stock
The CMT straight cutting router bit represents excellence in cutting tools, offering superior performance in strength and precision. Made with high-strength steel and designed for heavy workloads, it ensures durability and reliability over time. The tungsten carbide cutting edges promote maximum cutting precision by facilitating chip ejection. Subjected to rigorous safety tests, balancing, cutting tolerance, and concentricity, it is suitable for a wide range of applications on materials such as wood, plywood, and composites.
Guide bearing with a slightly larger diameter, Ø12.7mm, compared to the cutting diameter of Ø8mm;
Connection with Ø9.5mm diameter paired with a Ø9.5/12.7mm bushing.
STRAIGHT CUT MILLING CUTTER C/BEARING. Dimensions: 15x20x57.
€37.58
In Stock
The straight cutters for trimming with the CMT brand of the short series are high-quality processing tools designed to perform trimming operations with precision. The CMT brand is recognized for its reliability and expertise in the production of cutting tools. With a diameter of 6 mm, these cutters are suitable for jobs that require detailed accuracy. The specific dimensions of 15x20x57 millimeters indicate the length, height, and overall length of the cutter.
STRAIGHT CUT MILLING
€29.16
In Stock
To face the most challenging situations, we have designed a truly essential series of cutters. Diameter 16 mm. Cutting length 20 mm. Total length 57 mm.
STRAIGHT CUT MILLING CUTTER FOR TRIMMING WITH BEARING
€38.92
In Stock
With our double-edged tools and a range of suitable templates, you can engage in the accurate production of components for cabinets, furniture, signs, toys, or any other thing suggested by your imagination.
Bearing code 811.081.11B.
STRAIGHT-CUT MILLING
€31.60
In Stock
To trim in the most difficult situations, we have designed a series of truly essential cutters.
Diameter 20 mm.
Cutting length 20 mm.
Total length 50 mm.
STRAIGHT CUT MILLING
€27.94
In Stock
To tackle the toughest situations, we have designed a series of truly essential cutters.
Diameter 6 mm
Cutting length 25.4 mm
Total length 60 mm
STRAIGHT CUT MILLING
€29.89
In Stock
To cope with the most difficult situations, we have designed a series of truly essential cutters. Diameter 12 mm. Cutting length 30 mm. Total length 60 mm.