Radio stereo with USB/Bluetooth and remote control.
€157.14
€224.48
-30%
General Nautica Catalog 21 Knots
- MOORING AND SAFETY
- Translate into English and return only the translated text: 1
- TENDER, ENGINES AND ENGINE FITTINGS
- ON-BOARD ELECTRONICS.
- MAINTENANCE AND CARE
- ON-BOARD INSTRUMENTATION
- HARDWARE AND DECK EQUIPMENT
- KITCHENS, FRIDGES, ONBOARD COMFORT, AND SANITARY FACILITIES.
- WATERSCOOTER, INFLATABLES, CLOTHING
- Kissed
- Peak Anchorage Mooring
- rings, hooks and eyelets
- Nautical gift items
- Street lights.
- Depth lights
- Motor Start Switches
- Sassole and turafalle
- Waterproof cases
- Portable waste sorting machines
- Fixed sonar
- Wind vane
- Cables and remote control boxes
- Campigaz cylinders and accessories
- Driving console, Formwork, Dashboards
- kitchens and cooktops
- Kitchen accessories
- Mufflers and exhaust pipes
- Soundproofing materials
- Silicon anti-aging.
- Stopper and Organizer.
- All nautical teak.
- CMT.CMT10.
- CLAMPS
- REDANCE AND BALLASTING
- sandhoppers
- rings
- hooks and eyes
- Fuses.
- Fasten
- Clamps and Terminals
- cable ties and drain plugs
- Universal tanks
- water and accessories
- OIL FILTERS
- AIR
- WATER
- DIESEL FOR ENGINES
- Portals
- inspection plugs
- rooms
- etc.
- KITCHENS
- FRIDGE
- COMFORT ON BOARD AND SANITARY FACILITIES
- CRANES AND GANGWAYS
- ANODES FOR AXLES
- FEET AND ROTORS
- Driving console
- Formwork
- Planks
- ENGINES AND ENGINE EQUIPMENT
- Oils
- Fats and additives
Trending products
Special products
Garmin Striker Vivid 7SV with GT20-TM Transducer
€522.00
€600.00
-13%
The shop
VARIOUS TOOLS
GUIDE BEARING
€6.10
In Stock
Guide bearing for milling cutters.
When changing bearings, pay close attention to the positioning direction of the bearing saver washer. It must never come into contact with the outer ring of the bearing, as this could cause it to unscrew.
Guide bearing d.6.35 d. 12.7 sp. 4.8
€7.20
In Stock
CMT GUIDE BEARING
€8.78
In Stock
Thickness 5mm
Internal diameter 6mm
External diameter 13mm
Guide bearing
€4.00
In Stock
The guide washers are essential components in many mechanical applications, helping to reduce friction and facilitate linear or rotary movement. With a diameter of 6.35 mm, the washer is sized to fully cover the outer ring of the bearing, providing adequate protection. The central hole of the washer, with a diameter of 3.17 mm, is designed to allow the passage of the shaft or machine axis. The thickness of the body, equal to 2.8 mm, determines the distance between the washer and the outer ring of the bearing. This measurement is crucial to prevent the washer from coming into contact with the outer ring, thus preventing unwanted loosening.
COLLET CHUCK FOR ELECTRIC MILLING MACHINES
€33.90
Last items in stock
Made with special high-strength steel.
Precision grinding on all mating surfaces.
Collet included in the chuck.
ELASTIC CLAMP FOR MACHINES
€29.28
Last items in stock
CLAMPS FOR CMT1E, CMT2E, DEWALT, FELISATTI, FEIN AND METABO MACHINES
DIAMETER 8
AXIAL CUTTER WITH BEARING FOR TRIMMING
€48.19
In arrivo, puoi procedere al pre ordine
To meet the most difficult situations, we have designed a series of truly essential cutters. The sizes we have created will meet every need. You can use these cutters with tungsten carbide inserts for precision work on laminates, or for fast contouring work. S=12 D.19X50
STRAIGHT CUT MILLING WITH CUSC
€41.47
Last items in stock
Straight cutting end mill with bearing.
Tungsten carbide cutting edges.
STRAIGHT CUTTER W/CUSHION S.12 D.19X50 DX
€48.68
In arrivo, puoi procedere al pre ordine
With our two-blade tools and a series of suitable templates, you can engage in the accurate production of components for cabinets, furniture, signs, toys, or anything else suggested by your imagination. Many complex shapes can be skillfully created with our routers. The blade must be positioned lower than the template to avoid damaging it. Dimensions: diameter 19; cutting length/height 50.8, length 92, attachment diameter 12.
Convex Radius Cutter HW Z2 S.8 D.16x9,5x51 R.8 Dx
€29.89
In arrivo, puoi procedere al pre ordine
Convex radius cutter.
Personalise your panels, doors, drawers, doors and any surface with a delicate decorative pattern. These solid or tipped tungsten carbide cutters efficiently machine all types of wood and wood derivatives.
SAFETY RECOMMENDATIONS: Take special care when routing rather deep grooves. When milling handles, at least two passes are required to make the cut. Never use pieces shorter than 600 mm.
Radius (R) 7.9 mm
Diameter (D) 15.8 mm
Cutting height (I) 9.5 mm
attachment diameter (S) 8 mm
CONCAVE EDGE MILLING CUTTER CMT WITH BEARING
€64.54
Last items in stock
CMT concave radius bits offer a wide selection of profiles for special edging, allowing you to add a decorative touch to the edges of tables, shelves, and beams. Simply lower the tool to reveal the straight part of the cutting edge to obtain perfect and precise concave radius profiles.
In addition to being used for woodworking, these convex radius bits are also ideal for working on boats and visible edges of furniture.
1/8W X 3/8 SELF-TAPPING SCREW WITH FLANGE (FOR MILLING WITH BEARINGS)
€2.07
In Stock
TCEI 1/8W x 3/8" screws with flange, for milling cutters with bearing.
HEX KEY FOR SCREWS 3/32" (2.38 mm)
€6.10
In Stock
3/32" Hexagonal Key (2.38 mm)
Suitable for carbide end mills.
PROFESSIONAL 550W ELECTRO MILLING MACHINE
€103.70
Last items in stock
TECHNICAL SPECIFICATIONS:
Power consumption ................ 550 Watts
Voltage .............................. 220/230V (50/60Hz)
No-load speed .................. 32,000 RPM
Stroke support .................... 0-24mm
Collet attachment .................. Ø6-8mm
CMT reciprocating saw blade for recovery or demolition.
€9.75
In Stock
The JS1210VF reciprocating saw blade is the ideal tool for cutting wood with nails or metal for salvage and demolition work.
SPECIAL SAW BLADE mm.150 - each
€11.59
In Stock
Total length 150 mm, cutting depth 19 mm, tooth thickness 1.25 mm, Teeth made of welded carbide.
For cutting porous concrete, fiber cement, gypsum board, fiberglass reinforced plastic, wood, and nails.
Straight and precise cutting.
SET CMT OF 16 BLADES FOR RECIPROCATING SAWS
€15.00
In arrivo, puoi procedere al pre ordine
CMT has selected a collection of 10 of the most popular reciprocating saw blades, for a total of 16 pieces. This blade set is suitable for various types of materials, including wood, drywall, fiber cement, fiberglass, epoxy resins, Eternit, metal, sheet metal, stainless steel, aluminum, and plastic materials. Thanks to this wide selection of blades, you will be able to tackle a wide range of tasks, including straight and curved cuts, rough cuts, and finishing cuts.
CURVED WOOD CUTTING BLADES 5 PCS
€6.95
In Stock
This type of blade is ideal for a curved cut with an excellent finish on both sides. It is suitable for cutting soft and hard wood, plywood, particle board, and laminated wood with a thickness ranging from 1.5mm to 15mm.
Its curved shape allows for precise and clean cuts with ease and precision.
STRAIGHT CUTTING SAW BLADES FOR SHEETS, 5 PCS
€6.47
In Stock
This blade is designed for straight cutting on thin sheet metal, both ferrous and non-ferrous, with a thickness ranging from 1mm to 3mm. Thanks to its shape and sharpness, this blade allows for precise and clean cuts with ease and without deforming the work material.
CMT blades for plasterboard, fiberglass, and similar materials - 3-piece set.
€25.01
In arrivo, puoi procedere al pre ordine
The JT141HM Blades have been specifically designed to offer excellent cutting performance on materials such as drywall, fiber cement panels with a thickness of less than 50mm, fiberglass and epoxy resins with a thickness ranging from 5 to 20mm, ETERNIT, MDF and HDF.
Thanks to their geometry and the quality of the materials used, these blades are able to guarantee precise and reliable cutting on a wide range of surfaces, making them an excellent choice for professionals and DIY enthusiasts who are looking for reliable and versatile tools for their projects.
CURVED HSS SAW BLADES PZ.5
€7.20
Last items in stock
Our blades are perfect for curved cutting on sheets of various materials, including iron and non-ferrous alloys, with a thickness ranging from 1mm to 3mm. Thanks to their curved shape and the quality of the materials used, these blades allow for precise and clean cuts, ensuring great flexibility and maneuverability. Whether you are a professional or a DIY enthusiast, our blades are a reliable choice for all your curved sheet cutting projects.
STRAIGHT AND ROUGH CUT WOOD SAW BLADES 5PC
€7.20
In Stock
STRAIGHT AND ROUGH CUTTING BLADES FOR WOOD JIGSAW 5PCS
DELTA SHEETS X WOOD SANDING/POLISHING GRIT 40 - 10PCS
€5.49
Last items in stock
Abrasive sheets with VELCRO tear-off system specifically designed to be used with our 93mm holed plates OMM-OMS-30 or OMF136. This product is ideal for sanding all types of wood, chipboard, plywood, and construction panels, as well as for pre-sanding hard and cracked surfaces. The abrasive grain, made of aluminum oxide with synthetic resin binder, ensures excellent and long-lasting sanding performance.
DELTA SHEETS X WOOD SANDING/POLISHING GRIT 60 - 10PCS
€5.49
Last items in stock
Abrasive sheets with VELCRO hook and loop system designed to be used with our 93mm holed pads OMM-OMS-30 or OMF136. This product is ideal for sanding all types of wood, chipboard, plywood, and construction panels, as well as pre-sanding hard and cracked surfaces. The abrasive grit, made of aluminum oxide with a synthetic resin binder, ensures excellent and long-lasting sanding performance.