List of products by brand Jabsco
JABSCO WATER IMPELLER 1210-0001B
JABSCO WATER IMPELLER 1210-0003P
Flexible impellers Jabsco can be mounted on most brands and models of engine cooling water pumps, bilge pumps, transfer pumps, and general-purpose pumps.
IMPELLER JABSCO 17935-0001B
Jabsco impeller 17936-0001B
Impeller JABSCO 17937-0001B (Volvo Penta 3588475)
JABSCO IMPELLER 22405-0001-P FOR PUMP
JABSCO 30573-000 accumulator tank.
The Jabsco 30573-0000 Accumulator Tank is intended for installation in any pumped water system controlled by a pressure switch. The Accumulator Tank smooths water flow and reduces on/off cycling of the pump.
Manufacturer Features:
Improves pump life
Reduces noise
Eliminates water hammer
Improves temperature control
Mounts in any position
This accumulator tank is constructed out of black and measures approximately 13 1/4" L x 4 3/4" W overall. Connects with either (2) 1/2" barbed hose ports or (2) 1/2" Dia. threaded port fittings, which come included.
Jabsco impeller for Puppy 6303-0001 pumps.
Jabsco impeller for Puppy 6303-0003B pumps.
Jabsco 6303-0003B Impeller
Jabsco 6303-0003B nitrile impeller used as standard on Jabsco products such as the Water Puppy self-priming pumps and Electric Toilets.
JABSCO IMPELLER FOR PUMPS ENGINE PUMPS 653-0001-P
Impeller compatible made in Italy for Jabsco pump, 17937-0001-0003. Equipped with:
- 1 o-ring
- 2 gaskets
- 1 grain
Impeller Jabsco for Puppy Pumps 673-0001-P.
Jabsco impeller for Puppy pumps 836-0001-P.
JABSCO IMPELLER 17018-0001-P
Impeller Jabsco Pump 920-0001B
REPLACEMENT PRESSURE SWITCH FOR FLOJET 4405LF PRESSURE TANK
Pressure switch with a range of 2.4bar / 35PSI
Original code: 02090104
REPLACEMENT PRESSURE SWITCH FOR FLOJET TRIPLEX 3426 AUTOMATIC PRESSURE SYSTEM
Pressure switch Flojet Triplex 25
Original Code: 02091025
PRESSURE SWITCH REPLACEMENT FOR FLOJET TRIPLEX 3636 PRESSURE TANK.
Flojet Triplex 40 Pressure Switch2.7bar / 40PSI
Original Code: 02091040
REPLACEMENT PRESSURE SWITCH FOR FLOJET TRIPLEX 3526 PRESS CONTROL PUMP
Flojet Triplex Pressure Switch 50 3.4bar /50PSI
Code: 1092091050
Original Code: 02091050
RULE 2000GPH 24V IMMERSION PUMP
- Consumption: 4 A
- Dimensions: D. 105x155 h mm.
- Fuse: 7.5 A
- Hose fitting: 28 mm
- Max Flow: 120 L/min.
- Pump Type: Immersion
- Volt: 24 V
Rule 2000 Pump - (original code 12) is a submersible bilge pump for medium to large-sized boats, suitable for quickly emptying the bilge or any water collection well. The Rule 2000 pump has the highest quality available on the market and is designed to work and last long. The Rule 2000 is available in both 12 V and 24 V.
- High Flow: 120 liters/minute
- Head: up to 3 meters
- Removable snap-in base for inspection and cleaning
- Motor tested up to 2500 hours of operation
- High quality-to-price ratio!
- 28 mm outlet hose
- Dimensions mm: D. 105x155h
RULE 3700GPH 12V IMMERSION PUMP
- Consumption: 15.5 A
- Dimensions: D. 135x180 h mm.
- Hose fitting: 38 mm.
- Max Flow Rate: 220 L/min.
- Pump Type: Submersible
- Volt: 12 V
- Exclusive long-lasting Rule motor with permanent lubrication bearings and water cooling
- Double insulation on the shaft
- Extremely robust acetal housing
- Max flow rate: 220 l./min
- Head: 4 meters
- Snap-on base for easy inspection and cleaning
- Dimensions mm.: D. 135x180h
- 38 mm outlet tube
- The Rule 3700 is available in 12V or 24V
RULE 3700GPH 24V IMMERSION PUMP
- Consumption: 7 A
- Dimensions: D. 135x180 h mm.
- Hose connection: 38 mm.
- Max Flow Rate: 220 L/min.
- Pump Type: Submersible
- Volt: 24 V
- Exclusive Rule motor with long-lasting permanent lubrication bearings and water cooling
- Double insulation on the shaft
- Extremely robust acetal casing
- Max flow rate: 220 l/min
- Head: 4 meters
- Snap-on base for easy inspection and cleaning
- Dimensions: D. 135x180h mm
- 38 mm outlet tube
- The Rule 3700 is available in 12V or 24V
JABSCO 900 12 V MACERATOR PUMP (BLACK WATER)
- Power supply: 12 V
- Hose connector: 25 mm.
The Jabsco 900 macerator (code 18590) is designed to quickly empty black water holding tanks. The Jabsco 18590 macerator pump automatically primes up to a height of 1.2 meters and is able to empty up to 600 liters in one go, making the whole discharge operation simple and fast. The waste is finely ground and made able to easily pass through the usual discharge pipes on board (25 mm.). It also features a safety system to protect the impeller in case of dry running. Jabsco 18590 is the recommended macerator for those looking for maximum reliability and durability over time.
JABSCO WATER PUPPY 12V BILGE PUMP
- Self-priming up to: 1.2 meters.
- Recommended for liquids: Water
- Consumption: 13A
- Dimensions: 18x12x8.9 cm.
- Weight: 3 kg.
- Hose diameter: 25 mm.
- Max flow rate: 32 L/min.
- Head: 6 m
- Pump type: Self-priming, Impeller
- Voltage: 12 V
BILGE PUMP JABSCO WATER PUPPY 24V
- Self-priming up to: 1.2 m
- Recommended for liquids: Water
- Power consumption: 6 A
- Dimensions: 18x12x8.9 cm
- Weight: 3 kg
- Hose connection: "1/2" BSP ", 25 mm
- Max flow rate: 32 L/min
- Head: 6 m
- Pump type: Self-priming, Impeller
- Voltage: 24 V