WATERPROOF ROUND SHAPE STEREO RADIO USB/BLUETOOTH/DAB
€115.29
€164.70
-30%
General Nautica Catalog 21 Knots
- MOORING AND SAFETY
- Translate into English and return only the translated text: 1
- TENDER, ENGINES AND ENGINE FITTINGS
- ON-BOARD ELECTRONICS.
- MAINTENANCE AND CARE
- ON-BOARD INSTRUMENTATION
- HARDWARE AND DECK EQUIPMENT
- KITCHENS, FRIDGES, ONBOARD COMFORT, AND SANITARY FACILITIES.
- WATERSCOOTER, INFLATABLES, CLOTHING
- Kissed
- Peak Anchorage Mooring
- rings, hooks and eyelets
- Nautical gift items
- Street lights.
- Depth lights
- Motor Start Switches
- Sassole and turafalle
- Waterproof cases
- Portable waste sorting machines
- Fixed sonar
- Wind vane
- Cables and remote control boxes
- Campigaz cylinders and accessories
- Driving console, Formwork, Dashboards
- kitchens and cooktops
- Kitchen accessories
- Mufflers and exhaust pipes
- Soundproofing materials
- Silicon anti-aging.
- Stopper and Organizer.
- All nautical teak.
- CMT.CMT10.
- CLAMPS
- REDANCE AND BALLASTING
- sandhoppers
- rings
- hooks and eyes
- Fuses.
- Fasten
- Clamps and Terminals
- cable ties and drain plugs
- Universal tanks
- water and accessories
- OIL FILTERS
- AIR
- WATER
- DIESEL FOR ENGINES
- Portals
- inspection plugs
- rooms
- etc.
- KITCHENS
- FRIDGE
- COMFORT ON BOARD AND SANITARY FACILITIES
- CRANES AND GANGWAYS
- ANODES FOR AXLES
- FEET AND ROTORS
- Driving console
- Formwork
- Planks
- ENGINES AND ENGINE EQUIPMENT
- Oils
- Fats and additives
Trending products
Special products
Garmin Striker Vivid 7SV with GT20-TM Transducer
€522.00
€600.00
-13%
The shop
List of products by brand CMT
There are 105 products.
PROFESSIONAL 550W ELECTRO MILLING MACHINE
€100.04
Last items in stock
TECHNICAL SPECIFICATIONS:
Power consumption ................ 550 Watts
Voltage .............................. 220/230V (50/60Hz)
No-load speed .................. 32,000 RPM
Stroke support .................... 0-24mm
Collet attachment .................. Ø6-8mm
CONCAVE EDGE MILLING CUTTER CMT WITH BEARING
€64.54
Last items in stock
CMT concave radius bits offer a wide selection of profiles for special edging, allowing you to add a decorative touch to the edges of tables, shelves, and beams. Simply lower the tool to reveal the straight part of the cutting edge to obtain perfect and precise concave radius profiles.
In addition to being used for woodworking, these convex radius bits are also ideal for working on boats and visible edges of furniture.
PIN POINT Z4 SP S.13X50 D.15X140 DX
€60.39
Last items in stock
Pin tips 529 mm. All technical details are indicated in the photo.
TECHNICAL FEATURES:
Very high resistance of cutting edges to wear
SP steel
4 cutting edges.
Z4 SP S.13X50 D.12X140 DX - POINT FOR PINS
€56.00
Last items in stock
529 mm pin tips. All technical details are indicated in the photos.
TECHNICAL FEATURES:
- Very high wear resistance of cutting edges
- SP steel
- 4 cutting edges.
52mm Z4 PIN POINT
€54.78
In Stock
Very high resistance of the cutting edges to wear
SP Steel
4 cutting edges.
S=13X50 D=8X140
Concave milling cutter with insert.6 D.38.1 R.12.7 DX
€54.78
Last items in stock
Concave radius cutters 25.4MM TO BE USED ONLY ON WORKBENCHES.
Dimensions: shank diameter 6, radius 12.7, total length 59, cutting length/height 19, diameter 38.1
Cylindrical shank tips for hinges-S:10x60, D:32x91 DX
€53.67
Last items in stock
Cylindrical tip for hinges-S:10x60, D:32x91 DX
ATT. TIPS. CYLINDRICAL FOR HW HINGES S10x60, D35x90 DX
€53.67
Last items in stock
COUNTERSUNK CYLINDRICAL TIPS FOR HW HINGES S10x60, D35x90 DX
Z4 529-mm PIN POINT
€53.56
In Stock
Very high resistance of cutting edges to wear
SP Steel
4 cutting edges.
S=13X50 D=10X140
CONCAVE RADIUS MILL WITH BEARING
€48.68
Last items in stock
Convex radius milling cutter with bearing.
Tungsten carbide cutting edges.
Support and sliding ball bearing.
STRAIGHT CUTTER W/CUSHION S.12 D.19X50 DX
€48.68
Last items in stock
With our two-blade tools and a series of suitable templates, you can engage in the accurate production of components for cabinets, furniture, signs, toys, or anything else suggested by your imagination. Many complex shapes can be skillfully created with our routers. The blade must be positioned lower than the template to avoid damaging it. Dimensions: diameter 19; cutting length/height 50.8, length 92, attachment diameter 12.
AXIAL CUTTER WITH BEARING FOR TRIMMING
€48.19
Last items in stock
To meet the most difficult situations, we have designed a series of truly essential cutters. The sizes we have created will meet every need. You can use these cutters with tungsten carbide inserts for precision work on laminates, or for fast contouring work. S=12 D.19X50
Cylindrical tip for HW hinges S:10x60, D:25x90 DX
€46.97
Last items in stock
CYLINDRICAL DRILL BIT FOR HW HINGES S:10x60, D:25x90 DX
Concave milling cutter with cushion.6 D.31.7 R.9.5 DX
€46.24
Last items in stock
Concave radius cutters OF 25.4MM TO BE USED ONLY ON WORKBENCHES.
Dimensions: 6 shank diameter, 9.5 radius, total length 56, cutting length/height 16, diameter 31.7.
CONVEX EDGE MILLING CUTTER WITH CUSHION.
€45.75
Last items in stock
Convex radius milling cutter with bearing.
Tungsten carbide cutting edges.
Support and sliding ball bearing.
CONCAVE RADIUS MILL WITH CUSC.
€45.14
In Stock
Concave radius milling cutter with bearing.
Tungsten carbide cutting edges.
Support and sliding ball bearing.
Concave milling cutter with cushion.6 S.18.7x12.7x54 R03 dx.
€43.31
In Stock
The concave radius cutters 7/8/938 offer extraordinary versatility, allowing the creation of a wide range of special edging profiles. Their flexibility is highlighted by the fact that they are ideal for finishing the edge of laminates, and in particular, the 1.6 mm radius cutter is recommended for optimal results on this type of material. It should be noted that the 25.4 mm to 38.1 mm radius cutters are specifically designed for use on work tables. Additional technical specifications are attached in the photo.
TRIMMING MILLING CUTTER C/CUSC Z2 S.6 D.19X25X74,5 DX
€42.09
Last items in stock
Our axial cutting trim router has been designed to offer excellent performance and versatility in a wide range of applications. Made with high-quality materials and equipped with tungsten carbide inserts, they ensure superior durability and consistent performance over time. They are ideal for precision work on laminates, allowing for impeccable and detailed finishes. Additionally, thanks to their ability to work quickly and accurately to shape, they are also suitable for projects that require a high degree of precision and speed. It is always recommended to wear dust masks and eye protection devices during milling operations.
Further technical details can be found in the attached photos.
PROFILED STRAWBERRY WITH CUSHION.
€42.00
Last items in stock
Profiled milling cutter with bearing.
Tungsten carbide cutting edges.
Support and sliding ball bearing.
PROFILED MILLING WITH BEARING
€41.48
In Stock
Profiled milling cutter with bearing.
Tungsten carbide cutting edges.
STRAIGHT CUTTER Z2+1 HW S.8X50 D.19X20X70 DX
€40.87
Last items in stock
The straight right angle milling cutters for pantograph are milling tools designed to work on solid wood, laminates, and plastic materials. The configuration of these cutters includes 2 cutters with radial grinding (Z2), which are ideal for milling operations on various surfaces. The cutter has 1 HW cutter (Z1) specifically designed for drilling operations. These cutters can be integrated on spindles or adapters for work centers, point-to-point machines, and CNC pantographs, ensuring compatibility with different milling equipment. Additional technical specifications are attached in the photo.
CUTTING BLADE FOR ANGLES AND SLOTS 4mm
€40.26
Last items in stock
CUTTING BLADE FOR ANGLES AND GROOVES MM.4
PROFILED STRAWBERRY WITH CUSHION.
€40.00
Last items in stock
Profiled milling cutter with bearing.
Tungsten carbide cutting edges.
Support and sliding ball bearing.
Concave milling cutter with cushioning. S.6 D.16.7x12.7x52.5 R2 dx.
€39.28
In Stock
The 7/8/938 concave radius cutters offer extraordinary versatility, allowing for the creation of a wide range of profiles for specific edging. Their flexibility is highlighted by the fact that they are ideal for finishing the edge of laminates, and in particular, the 1.6mm radius cutter is recommended for optimal results on this type of material. It should be noted that the 25.4mm to 38.1mm radius cutters are specifically designed for use on workbenches. Additional technical specifications are attached in the photo.