New products

Removes mildew stains from GRP, rubber and sky surfaces (boats, inflatable boats, cushions). Not suitable for use on fabric substrates, as it is based on sodium hypochlorite and may damage them. Restores the original colour of dinghy tubulars. Pack of 750 ml.

Use: After removing dirt not caused by mould stains, spray the product directly onto the surface concerned, wait until the stains disappear, then rinse. The waiting time varies depending on the severity of the mould. It is therefore necessary to leave the product to act for up to an hour, or repeat the application several times, until the desired result is obtained.

The expiry date refers to the product in intact packaging, correctly stored. We recommend always testing any product in a small, hidden area.

Sail cleaner is a product designed for cleaning all types of sails. It removes dirt halos, salt and stains in general. Does not affect fabric or seams. Also suitable for awnings and sail covers. 750 ml format

Use: Spray “Sail Cleaner” evenly and wait about 5 minutes, then scrub with a soft brush, then rinse. It is recommended to always test any product in a small, hidden area.

A detergent with a very high concentration of surfactants specially designed to solve all daily and seasonal boat cleaning problems. “Strength 100” cleans, renews, sanitizes and protects: fenders, cushions, awnings, fabric, carpet, Plexiglas, skay, wood, GRP, plumbing, interior and exterior boat surfaces. Eliminates bad odors.

5 kg canister.

Liquid Laser is a powerful descaling, deoxidizing and acidic specifically formulated to quickly remove scale, rust and yellowing on a wide range of surfaces, including fiberglass (GRP) and rubber.

Key features:

Removes dog teeth;

Removes yellowing and stains from GRP, restoring the material to its original appearance; and

Effective treatment for waterlines and areas with tough dirt deposits

Flux remover: fast-acting for removing oxidation and rust.

Engine feet: perfect for cleaning and deoxidizing engine feet and metal parts.

Slightly acidic product to quickly remove all those rust stains caused by moisture or through contact with ferrous and nonferrous materials that form on cushions, skies, fabrics and any fiber or material, including inflatable boats both neoprene and PVC.

250 ml format.

HOW TO USE: Spread the product on the affected parts, wait a few minutes depending on the severity of the stains to be removed, then scrub with a lightly abrasive sponge and rinse thoroughly. It is recommended to always test any product in a small, hidden area. Do not apply to galvanized metals.

The Yanmar aluminum sterndrive kit is designed to be compatible with ZT350 and ZT370 models, offering a high-quality solution for your boat's propulsion system. Made of durable aluminum, this kit replaces the original part numbers 196450-02490, providing excellent performance, durability and a long service life.

The Titan 230V 3.6kW Winch is a high-quality anchoring solution designed to deliver superior performance and durability in the harshest conditions. With a powerful and reliable electric motor, this winch is perfect for those seeking a combination of efficiency, ease of use, and ruggedness, ensuring safe and effortless anchoring.

Key features:

• 230V 3.6kW Electric Motor;
• Marine Anodized Aluminum Body: to ensure exceptional durability even in aggressive marine environments;
• 12mm Chain;
• Barbotin Independent Bell,
• Emergency Manual Recovery System: In case of failure or malfunction, the manual recovery system allows you to lift the chain and retrieve the anchor with ease,
• IP66 Motor.

The Tecnoseal Anode Kit for Volvo Duo-Prop 290 aluminum anodes is the ideal solution for protecting your boat's propulsion system from marine corrosion. Designed for Volvo Penta Duo-Prop 290 thrusters, this complete kit includes the high-quality aluminum anodes and all necessary hardware for quick and safe installation.

The autprop APS H5 zinc propeller spinner is an essential component for protecting the propeller shaft and metal parts of your sailboat from corrosion caused by the marine environment. Made of high-quality zinc alloy, this spinner is designed for long life and superior performance, even in the harshest conditions.

a=55 mm;

b= 21 mm;

h= 32 mm;

i= 41 mm;

Ø= 34 mm;

Ø1= 27 mm;

Ø2=7 mm;

Ø shaft= 20-35 mm

The Quick spinner for BTW300 is a component designed with an aerodynamic profile specifically for applications requiring rapid acceleration and stability in flight. 

A= 27 mm;

h= 49 mm;

Ø= 70mm;

Ø1= 6 mm;

Ø2=46 mm.

The Quick spinner for BTQ250 is a component designed with an aerodynamic profile specifically for applications requiring rapid acceleration and stability in flight. 

A= 24 mm;

h= 44 mm;

Ø= 59 mm;

Ø1= 6 mm;

Ø2=44 mm.

The Quick spinner for BTQ185 is a component designed with an aerodynamic profile specifically for applications requiring rapid acceleration and stability in flight.

A= 20 mm;

h= 32 mm;

Ø= 50 mm;

Ø1= 6 mm;

Ø2=39 mm.

The Yamaha engine plate is a replacement designed for Yamaha F6 and F9.9HP engines . With the original part number 68T-45251-00, this plate ensures a perfect fit and high compatibility with the mentioned models, helping to maintain optimal engine performance.

The dimensions of the plate are as follows:

• Length: 64 mm
• Height: 25 mm
• Thickness: 12 mm
• Central hole diameter: 5 mm
• Side hole diameter: 17 mm

The Polyform Norway Model A4 fender in black is the perfect choice for those looking for a sturdy and versatile product that provides excellent protection for their boat while mooring. Made with ultra impact-resistant walls, this fender is designed to withstand the most intense stresses, protecting your boat from damage caused by collisions and abrasions. One of the distinctive features of the A4 fender is its reinforced attachment hole, which increases its durability and safety.

Main technical features:

Length: 710 mm

Weight: 4 kg

Diameter: 550 mm

Translated with DeepL.com (free version)

MARLIN Yacht Paints introduces us to a new range of biocide-free silicone products that keep submerged surfaces clean due to the surface tension of the silicone itself and special surface additives that make it extremely difficult for biofouling (algae, dogtooth, coral, and other organisms) to attach effectively to treated surfaces, causing them to come off with the movement of the boat or light cleaning.

Velox sil is a transparent foul-release coating for propellers and metal parts. It provides exceptional effectiveness and adhesion. It protects propellers, axles, stern feet, flaps and other metal parts for up to 24 months. It is applied over special epoxy primer, PRIMESIL. Available in gray color and 1-liter package . 

MARLIN Yacht Paints introduces us to a new range of biocide-free silicone products that keep submerged surfaces clean due to the surface tension of the silicone itself and special surface additives that make it extremely difficult for biofouling (algae, dogtooth, coral, and other organisms) to attach effectively to treated surfaces, causing them to come off with the movement of the boat or light cleaning.

Velox sil is a transparent foul-release coating for propellers and metal parts. It provides exceptional effectiveness and adhesion. It protects propellers, axles, stern feet, flaps and other metal parts for up to 24 months. It is applied over special epoxy primer, PRIMESIL. Available in gray color and 500 ml package . 

MARLIN Yacht Paints introduces us to a new range of biocide-free silicone products that keep submerged surfaces clean due to the surface tension of the silicone itself and special surface additives that make it extremely difficult for biofouling (algae, dogtooth, coral, and other organisms) to attach effectively to treated surfaces, causing them to come off with the movement of the boat or light cleaning.

Velox sil is a transparent foul-release coating for propellers and metal parts. It provides exceptional effectiveness and adhesion. It protects propellers, axles, stern feet, flaps and other metal parts for up to 24 months. It is applied over special epoxy primer, PRIMESIL. Available in gray color and 500 ml package . 

IDRON Cruise is a self-polishing antifouling that combines resins and active ingredients to provide exceptional effectiveness. It dissolves evenly in the water at a controlled rate, always maintaining a fresh, active layer on the surface of the hull. Its balanced solubility makes it suitable even for fast hulls up to 30 knots. It is ideal for boats that stay in port for a long time, as it maintains its effectiveness over time. As easy to apply as a wall paint, it dries quickly, can be thinned with water and applied with a brush, creating a smooth, even surface.

Available in black color and 2.5-liter package. 

IDRON Cruise is a self-polishing antifouling that combines resins and active ingredients to provide exceptional effectiveness. It dissolves evenly in the water at a controlled rate, always maintaining a fresh, active layer on the surface of the hull. Its balanced solubility makes it suitable even for fast hulls up to 30 knots. It is ideal for boats that stay in port for a long time, as it maintains its effectiveness over time. As easy to apply as a wall paint, it dries quickly, can be thinned with water and applied with a brush, creating a smooth, even surface.

Available in grey color and 2.5-liter package. 

The High Dorado winch is a powerful and reliable solution for all on-board mooring and lifting needs. With 800W power and 12V power supply, it has The marine-grade anodized aluminum body offers excellent protection against corrosion, making it ideal for use in a marine environment. The manual free-fall chain system allows easy and safe chain retrieval, while the finger line tensioner ensures that the line is kept taut and tangle-free at all times.

Key features:

IP66 electric motor;

Barbotin for 6 mm ISO 4565 chain and for 10-12 mm (3-strand) rope;

Recovery speed under load: 20 m/min;

Maximum recovery speed: 25 m/min;

Maximum instantaneous pull: 650 kg;

Left type.

Max Power tunnels are made with high-quality all-isophthalic resins and pre-coated with gel, ensuring excellent performance and long service life. The advanced design provides a uniform first layer of resin, which allows drilling and punching without compromising the gel coating on the inner surface of the tunnel. This makes our tunnels especially strong and durable, ideal for industrial and professional applications.

Diameter: 185 mm;

Length: 150 mm.

THE PRICE IS FOR 1 PIECE!

Convex radius cutter.

Personalise your panels, doors, drawers, doors and any surface with a delicate decorative pattern. These solid or tipped tungsten carbide cutters efficiently machine all types of wood and wood derivatives.

SAFETY RECOMMENDATIONS: Take special care when routing rather deep grooves. When milling handles, at least two passes are required to make the cut. Never use pieces shorter than 600 mm.

Radius (R) 7.9 mm

Diameter (D) 15.8 mm

Cutting height (I) 9.5 mm

attachment diameter (S) 8 mm

Customise your panels, doors, drawers, doors and any surface with CMT's solid tungsten carbide cutters that efficiently machine any type of wood and wood derivatives. We offer a full range of diameters with different cutting depths to obtain unique doors or drawers. These cutters are also commonly used by sign makers, toy makers and hobbyists.

Safety recommendations: be especially careful when making deep grooves. Handles (or pulls) must only be made from wood with a regular grain and without any defects. 

Specifications

Cutting diameter: 19

Cutting length: 11.5

Total length: 50.8

Right or left-hand rotation: RH

Attachment diameter: 6

Number of teeth: 2

Convex radius cutter.

Personalise your panels, doors, drawers, doors and any surface with a delicate decorative pattern. These solid or tipped tungsten carbide cutters efficiently machine all types of wood and wood derivatives.

SAFETY RECOMMENDATIONS: Take special care when routing rather deep grooves. When milling handles, at least two passes are required to make the cut. Never use pieces shorter than 600 mm.

Radius (R) 7.9 mm

Diameter (D) 15.8 mm

Cutting height (I) 9.5 mm

attachment diameter (S) 6 mm