BOAT ENGINE OIL

Active filters

€226.80
In Stock

Synthetic THPD (Top High Performance Diesel) lubricating oil designed to meet the most demanding requirements for EURO III, EURO IV, and next-generation EURO V diesel engines. A product specifically designed for modern vehicles that require ACEA E7, API CI-4 lubricants.

Properties

? Can be used when biodiesel is used as fuel, following recommended change intervals set by manufacturers;

? Prevents cylinder bore polishing, typical in high-powered turbocharged engines;

? Its Total Base Number (TBN) allows it to protect the engine from corrosion by neutralizing acids formed during combustion of diesel with different sulfur content.

€150.00
In Stock

Evinrude XD100 oil, in a 2.5-gallon (9.46 liters) container, is the best synthetic oil for Evinrude E-TEC outboard engines, providing uncompromised lubrication and reducing friction and wear of parts. Its highly detergent formula reduces combustion deposits, keeping the engine clean and in excellent condition. Odorless and ashless, it is formulated to withstand extreme weather conditions, guaranteeing maximum efficiency down to -17°C. By using this oil, Evinrude E-TEC engines have reduced emissions, high performance, and unmatched reliability. XPS Marine is the line of lubricants and fuel treatment products for the maintenance and protection of marine engines.

€85.28
In Stock
Oil Direct Injection Bardahl TCW3, oil for modern 2-stroke marine engines with direct injection and high power, for which lubricants with strong lubricity, high thermal stability, and much higher performance than those required by NMMA TC-W3 standards are needed. - Formulated with premium quality ashless additives - Maximum cleaning of the piston, combustion chamber, and spark plugs, prevents ring sticking and provides high protection against rust, corrosion, and wear - Smokeless technology - Specifications: NMMA TC-W3
€69.41
In Stock
Extreme Pressure multigrade lubricant indicated for use in differentials of vehicles or in hypoid and helical transmission groups, as well as in final drives of Voith railways and manual transmissions where an API GL-5 lubricant is required. Characteristics: - Great load-carrying capacity and high momentary temperatures. Extreme Pressure (EP). - Excellent resistance to aging. - Excellent rust and foam resistance. - Facilitates lubrication at low temperatures. - Has excellent protection capacity in very harsh temperature and usage conditions. - Good anti-wear properties, prolonging the useful life of the transmission.
€68.55
Last items in stock
Homologated by the main automatic gearbox manufacturers. Suitable for Ecomat type transmissions. Special oil for automatic transmissions (ATF type), meets the needs of manufacturers requiring GM DEXRON II D quality level. Particularly suitable for automatic transmissions and power steering of vehicles, it can also be used in torque converters, hydraulic systems, and other applications where ATF DEXRON II fluid is required.
€63.44
In Stock
The Bardahl Inboard Premium Performance 4T 15W40 oil is a high-quality lubricant ideal for the latest generation of marine diesel engines, with high power and performance. Thanks to its advanced formulation, it is able to lubricate and protect all engine components optimally, ensuring greater durability and reliability of the system. Inboard Premium Performance 4T 15W40 offers maximum protection against wear and corrosion, thanks also to the specific API CH-4, SJ; ACEA E7 and MB 228.3 specifications. Suitable for engines of numerous brands, this lubricant is available in 1 and 4-liter packaging.
€59.06
In Stock

Synthetic THPD (Top High Performance Diesel) lubricating oil designed to meet the most demanding requirements for EURO III, EURO IV and next generation EURO V diesel engines. Specifically designed for modern vehicles that require ACEA E7, API CI-4 lubricants.

Properties

? Can be used when biodiesel is used as fuel, following the recommended change intervals established by manufacturers;

? Prevents cylinder liner polishing, typical of high-power turbocharged engines;

? Its Total Base Number (TBN) allows it to protect the engine from corrosion by neutralizing acids formed in the combustion of diesel with different sulfur content.

€56.12
In Stock
The Bardahl Green Power Four 10W40 oil is a high-performance lubricant for modern 4-stroke outboard gasoline engines, meeting API SLCF/ACEA A3/B3 requirements. It features an exclusive anti-friction formula that provides maximum protection against corrosion and wear. Bardahl Green Power Four, with its high specifications and exclusive Bardahl Polar Plus anti-friction formula, creates a protective barrier between metal surfaces, significantly increasing the lifespan of your 4-stroke outboard while reducing fuel consumption. 5-liter packaging. It meets API SLCF/ACEA A3-B3 requirements.
€36.48
In Stock

Suitable for:

• Diesel engines, naturally aspirated or turbocharged, of trucks, buses, and earthmoving machines;

• Petrol and diesel engines, naturally aspirated or turbocharged, of cars;

• Suitable for "powershift" transmissions and final drives that require the use of Caterpillar TO-2 or Allison C-3/C-4 oil;

• In the appropriate viscosity grade, they can also be used in manual transmissions and hydraulic systems.

5 LT canister.

€39.04
In Stock
Specific oil for hydraulic systems of industrial vehicles, forklifts, earthmoving machines, harvesters, and agricultural machinery in general. It ensures the proper functioning of the hydraulic system thanks to its properties of water resistance, anti-wear, anti-rust, and thermal oxidative stability.
€28.06
Last items in stock
Cutting oil emulsifiable formulated to solve problems of: boring, tapping, threading, broaching, milling. Excellent cooling power. Avoids the emission of fumes. Protects machines and workpieces from rust. Allows working with medium and high carbon steel, nickel and its alloys, manganese, 18/10 stainless steel, and mold steels. Washable with water. Canister of 5 liters.
€23.30
In Stock
The new 4-Stroke Quicksilver oil has been specifically formulated to keep the engine "cool" even when the going gets "hot". It is a multi-viscosity oil to be used at any time during the boating season. It helps reduce engine wear and corrosion, protect bearings from chemical wear, keep pistons clean, prevent ring sticking, and inhibit rust and other deposits. It meets API SG/CD specifications for use in diesel and gasoline engines. SAE 25 W-40.
€22.57
In Stock
The Bardahl T&D Gear Oil 80W-90 is specifically developed for stern drives, transmissions, and marine engine gears. Thanks to its advanced lubrication technology, this lubricant ensures extremely high resistance to the most demanding conditions of use. Furthermore, the exclusive Bardahl Polar Plus formula provides maximum protection against friction, wear, and corrosion caused by seawater, with a triple action of lubrication, surface protection, and Fullerene c60 micro-ball bearings. The T&D Gear Oil 80W-90 meets the specifications SAE 80W-90 API GL5 MT1 / ZF TE-ML 05A,07A,12E,16B,17B,19B, and is suitable for any type of transmission and gear that requires a high-quality lubricant.